Electronic Components Datasheet Search |
|
SST25WF080 Datasheet(PDF) 9 Page - Microchip Technology |
|
SST25WF080 Datasheet(HTML) 9 Page - Microchip Technology |
9 / 33 page ©2012 Silicon Storage Technology, Inc. DS25024C 10/12 9 8 Mbit 1.8V SPI Serial Flash SST25WF080 Not Recommended for New Designs Status Register The software status register provides status on whether the flash memory array is available for any Read or Write operation, whether the device is Write enabled, and the state of the Memory Write pro- tection. During an internal Erase or Program operation, the status register may be read only to deter- mine the completion of an operation in progress. Table 4 describes the function of each bit in the software status register. Busy The Busy bit determines whether there is an internal Erase or Program operation in progress. A ‘1’ for the Busy bit indicates the device is busy with an operation in progress. A ‘0’ indicates the device is ready for the next valid operation. Write Enable Latch (WEL) The Write-Enable-Latch bit indicates the status of the internal Write-Enable-Latch memory. If the WEL bit is set to ‘1’, it indicates the device is Write enabled. If the bit is set to ‘0’ (reset), it indicates the device is not Write enabled and does not accept any Write (Program/Erase) commands. The Write- Enable-Latch bit is automatically reset under the following conditions: • Device Reset • Power-up • Write-Disable (WRDI) instruction completion • Byte-Program instruction completion • Auto Address Increment (AAI) programming is completed or reached its highest unpro- tected memory address • Sector-Erase instruction completion • Block-Erase instruction completion • Chip-Erase instruction completion • Write-Status-Register instructions Table 4: Software Status Register Bit Name Function Default at Power-up Read/Write 0 BUSY 1 = Internal Write operation is in progress 0 = No internal Write operation is in progress 0R 1 WEL 1 = Device is memory Write enabled 0 = Device is not memory Write enabled 0R 2 BP0 Indicate current level of block write protection (See Table 5) 1 R/W 3 BP1 Indicate current level of block write protection (See Table 5) 1 R/W 4 BP2 Indicate current level of block write protection (See Table 5) 1 R/W 5 BP3 Indicate current level of block write protection (See Table 5) 0 R/W 6 AAI Auto Address Increment Programming status 1 = AAI programming mode 0 = Byte-Program mode 0R 7 BPL 1 = BP3, BP2, BP1 and BP0 are read-only bits 0 = BP3, BP2, BP1 and BP0 are read/writable 0R/W T4.1 25024 |
Similar Part No. - SST25WF080_12 |
|
Similar Description - SST25WF080_12 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |