(1/3)

007-01 / 20071025 / e9421_mza.fm

• All specifications are subject to change without notice.

Chip Beads(SMD Array)

For General Signal Line

MZA Series MZA3216 Type

FEATURES

• A single MZA series chip provides noise attenuation for four

lines, making it ideal for use with I/O lines of various highly

miniaturized.

• Electronic equipment, such as portable products, which

comprise high density circuitry.

• Low crosstalk between adjacent circuits.

• Internal electrodes feature low DC resistance, minimizing

wasteful power consumption.

• Electroplated terminal electrodes accommodate reflow

soldering.

• Monolithic structure ensures high reliability.

• The products contain no lead and also support lead-free

soldering.

• It is a product conforming to RoHS directive.

APPLICATIONS

High-frequency noise countermeasure in computers, printers,

VCRs, televisions, portable telephones, and other equipment.

PRODUCT IDENTIFICATION

(1) Series name

(2) Dimensions L

× W

(3) Material code

(4) Nominal impedance

121:120

Ω at 100MHz

(5) Characteristic type

(6) Packaging style

T:Taping

RECOMMENDED SOLDERING CONDITION

REFLOW SOLDERING

SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD

PATTERN (REFLOW SOLDERING)

TEMPERATURE RANGES

PACKAGING STYLE AND QUANTITIES

HANDLING AND PRECAUTIONS

• Before soldering, be sure to preheat components. The preheat-

ing temperature should be set so that the temperature difference

between the solder temperature and product temperature does

not exceed 150°C.

• After mounting components onto the printed circuit board, do not

apply stress through board bending or mishandling.

• Do not expose the inductors to stray magnetic fields.

• Avoid static electricity discharge during handling.

• When hand soldering, apply the soldering iron to the printed cir-

cuit board only. Temperature of the iron tip should not exceed

350°C. Soldering time should not exceed 3 seconds.

• This product does not apply to flow soldering construction

method.

Conformity to RoHS Directive

MZA 3216 R 121 A

T

(1)

(2) (3) (4) (5) (6)

Natural

cooling

10s max.

Preheating

60 to 120s

Soldering

30 to 60s

230˚C

250 to 260˚C

180˚C

150˚C

Time(s)

Operating/storage

–55 to +125°C

Packaging style

Quantity

Taping

4000 pieces/reel

Dimensions in mm

Weight: 20mg

0.8

±0.1

0.4

±0.15

3.2

±0.2

0.8

0.4

Ferrite

Terminal

electrode

• Please contact our Sales office when your application are considered the following:

The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)

• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific

bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.