C03E.pdf

May.17,2013

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Explanation of Symbols in This Catalog

L x W dimension: products of 0.6 x 0.3 mm or less

Product suitable for acoustic noise reduction and low distortion

This product suppresses acoustic noise,

which occurs when a ceramic capacitor is used,

by devising the materials and configuration.

Product resistant to deflection cracking

This capacitor is designed to prevent failures as much

as possible by short mode caused by cracking

when there is board deflection.

Product with solder cracking suppression

This capacitor is configured with metal terminals or lead

wires connected to the chip.

The metal terminals or lead wires relieve the stress from

expansion and contraction of the solder, to suppress solder

cracking.

Also, including capacitor which can be mounted with a

conductive adhesive, instead of soldering.

Fail safe product

This capacitor is designed to prevent failures

as much as possible by short mode.

AEC-Q200 compliant product

EU RoHS

Compliant

All the products in this catalog comply with EU RoHS.

EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use

of Certain Hazardous Substances in Electrical and Electronic Equipment."

For more details, please refer to our website 'Murata's Approach for EU RoHS'

(http://www.murata.com/info/rohs.html).

AEC-

Q200

Ultra-

compact

Anti-

noise

Fail

safe

Deflecting

crack

Soldering

crack