B207

2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)

DF3 Series

sFeatures

Correspond to Board Design in Wide Variation

qID Socket

(1) Low profile design with the mounting height of 6.8mm

(2) Achieves the multi-harness by the full automatic ID machine in combination with the DF11 series ID

type.

(DF11 series represents the 2mm pitch single-row product.Please refer to page B220 to B233.)

qCrimp Socket

(1) Low profile design with mounting height 7.5mm.

(2) Provide the contact crimping area with the sufficient space, and secures the stable crimping

operation.

qReceptacle

(1) The board can be connected horizontally or vertically in combination with the straight header with the

right angle header.

(2) For horizontal connection, the board to board size is the low profile of 6.6mm.

(3) Compatibility with the in-line plug allows the receptacle to set the board side to the receptacle and

the cable side to the plug in the board to cable connection.

qPin Header

(1) The board pre-fixed kink is treated with the post pin.

(2) The style employs a scoop-proof and sturborn box type.

(3) The type corresponding to SMT is avilable, using the heat-proof resin.

This SMT header is equipped with the metal tab to prevent peeling in the solder joint area.

qIn-line Plug

(1) The crimping in-line plug consits of two types, one type, which has pursued after space merits, and

the other employs the panel lock type, which can be fixed to the panel.

(2) The in-line adapter is available to insert and in-line the ID socket from both sides.

sApplications

Business equipment such as copy machine and printer

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.