8

3

Rotate down the actuator until firmly closed.

■

Operation and Precautions

Operation

1. FPC insertion procedure. Connector installed on the board.

1

Lift up the actuator.

Use thumb or index finger.

2. FPC removal

1

Lift up the actuator

Pull up the FPC at an angle of approximately 10°

① and than

withdrew it from the connector

②.

2

Insert the FPC (contact surfaces facing down) at angle of

approximately 10° to the board surface

①, making sure that

the FPC positioning tabs clear the protrusions on both sides

of the connector. Lower the FPC down

②, parallel to the

board surface.

①

②

①

②

FPC contact surface

faces downward

125°

Protrusions for

the FPC positioning.

125

°

Protrusions for

the FPC positioning.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.