AXA2R

8. Device design

1) Contact failure may result if dust or dirt

enters the contact section. Please take

appropriate measures when designing

the device to prevent this from

happening, for example by adding a

cover.

2) To ensure smooth insertion and

removal of cards, please design the

chassis so that no force is applied to the

metal shell on top of the socket. If a force

is present that pushes down on the metal

shell, the card will be pressed, which

might prevent ejection.

3) Please provide a guide or similar to

keep the socket from having force applied

to it when inserting and removing.

9. Card jump-out prevention function

1) This socket has a card jump-out

prevention function that works under

defined conditions. However, we strongly

recommend that you instruct users to

carefully handle the product to avoid

accidents due to improper use or product

liability risks.

2) The life of the card jump-out prevention

function is not guaranteed under the

following conditions: (1) while the card is

inserted incompletely, (2) while the card

is inserted in the wrong direction, and (3)

after the card is inserted in the wrong

direction

3) In order to prevent card jump-out,

resistance has been added that affects

card insertion and removal. Therefore,

you will feel resistance when inserting

and removing the card. This is normal.

10. Others

If you coat the PC board after soldering

for insulation and to prevent wear, make

sure that the coating does not adhere to

the connector.

For other details, please verify with

the product specification sheets.

panasonic-electric-works.net/ac

To be transferred to Honda Tsushin kogyo Co.,Ltd. from October 1, 2009