SMT power inductors

B82476B1xxxM100

Size 12.95 x 9.40 x 5.08mm

MAG IN PD

June 2013

Please read Cautions and warnings and

Page 6 of 7

Important notes at the end of this document

.

Cautions and warnings

sheets.

– Particular attention should be paid to the derating curves given there.

– The soldering conditions should also be observed. Temperatures quoted in relation to wave

soldering refer to the pin, not the housing.

varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,

or on glued joints. In particular, it is possible for washing varnish agent residues to have a

negative effect in the long-term on wire insulation.

– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic

housing or core. This pressure can have a deleterious effect on electrical properties, and in

extreme cases can damage the core or plastic housing mechanically.

– It is necessary to check whether the potting material used attacks or destroys the wire

insulation, plastics or glue.

– The effect of the potting material can change the high-frequecy behaviour of the components.

breakage of the core.

only be carried out by the customer.