107

Text

106

Text

Model Number Legend

SPST-NO Type Breaks 10-A Loads;

SPST-NO + SPST-NC Type Breaks

8-A Load

available.

size, magnetic interference, and contact

bounce.

also available

Rated coil voltage

Note: When ordering, add the rated coil voltage to the model number.

Example: G6C-1117P-US 12 VDC

G6C

-

-

VDC

12

34 5

6

7

1. Relay Function

None: Single-side stable

U:

Single-winding latching

K:

Double-winding latching

2. Contact Form

11:

SPST-NO

21:

SPST-NO + SPST-NC

3. Contact Type

1: Standard

4. Enclosure Ratings

7: Flux protection

4: Fully sealed

5. Terminals

P:

Straight PCB

C:

Self-clinching PCB

6. Approved Standards

US: UL/CSA certified

7. Rated Coil Voltage

3, 5, 6, 12, 24 VDC

Ordering Information

Classification

Contact form

Straight PCB

Self-clinching PCB

Flux protection

Fully sealed

Flux protection

Fully sealed

Single-side stable

SPST-NO

G6C-1117P-US

G6C-1114P-US

G6C-1117C-US

G6C-1114C-US

SPST-NO + SPST-NC G6C-2117P-US

G6C-2114P-US

G6C-2117C-US

G6C-2114C-US

SPST-NO

G6CU-1117P-US

G6CU-1114P-US

G6CU-1117C-US

G6CU-1114C-US

SPST-NO + SPST-NC G6CU-2117P-US

G6CU-2114P-US

G6CU-2117C-US

G6CU-2114C-US

SPST-NO

G6CK-1117P-US

G6CK-1114P-US

G6CK-1117C-US

G6CK-1114C-US

SPST-NO + SPST-NC G6CK-2117P-US

G6CK-2114P-US

G6CK-2117C-US

G6CK-2114C-US

Single-winding

latching

Double-winding

latching

PCB Power Relay – G6C

PCB Power Relay – G5CA

Installation

Make sure that sufficient space is provided between relays when

installing two or more relays side by side to facilitate heat

dissipation. Insufficient heat dissipation may result in the relay

malfunctioning.

Quick-connect Terminal Connections

• Do

not

pass

current

through

the

PCB

of

the

load

contactterminals (quick-connect terminals).

• The terminals are compatible with Faston receptacle #187

and are suitable for positive-lock mounting.

Use only Faston terminals with the specified numbers. Select

leads for connecting Faston receptacles with wire diameters

that are within the allowable range for the load current. Do not

apply excessive force to the terminals when mounting or

dismounting the Faston receptacle.

Insert and remove terminals carefully one at a time. Do not insert

terminals on an angle, or insert/remove multiple terminals at the

same time.

The following positive-lock connectors made by AMP are

recommended. Contact the manufacturer directly for details on

connectors including availability.

Charged Terminals

The section marked with dotted circles (indicated by arrows) in

the following diagram includes the charged terminals of the relay.

When the relay is mounted on a PCB, make sure that there are no

metal patterns on the section of the PCB facing the portion of the

relay shaded in the following diagram.

Other Precautions

• The G5CA is a power relay designed for applications switching

power loads such as heaters in electric household appliances.

Do not use the G5CA to switch micro loads less than 100 mA,

such as in signal applications.

• Use fully sealed models if the relays will require washing.

Fluxprotection

models

may

malfunction

or

the

relay's

performance may be otherwise adversely affected if cleaning

fluid enters the relay.

Precautions

ALL DIMENSIONS SHOWN ARE IN MILLIMETRES.

To convert millimetres into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

■

Precautions for Correct Use

Type

Type Receptacle terminals (See note.)

Positive housing

#187 terminals (width: 4.75 mm) AMP 170330-1 (170324-1)

AMP 172074-1 (natural color)

AMP 170331-1 (170325-1)

AMP 172074-4 (yellow)

AMP 170332-1 (170326-1)

AMP 172074-5 (green)

AMP 172074-6 (blue)

Note: The numbers shown in parentheses are for air-feeding

CAT. No. J151-E2-02A-X

Omron 08 Cat 1-302

5/10/07

15:39

Page 106