Electronic Components Datasheet Search |
|
HMT41GV7MFR8C-H9 Datasheet(PDF) 6 Page - Hynix Semiconductor |
|
HMT41GV7MFR8C-H9 Datasheet(HTML) 6 Page - Hynix Semiconductor |
6 / 67 page Rev. 1.0 / Aug. 2012 6 Input/Output Functional Descriptions Symbol Type Polarity Function CK0 IN Positive Line Positive line of the differential pair of system clock inputs that drives input to the on- DIMM Clock Driver. CK0 IN Negative Line Negative line of the differential pair of system clock inputs that drives the input to the on-DIMM Clock Driver. CK1 IN Positive Line Terminated but not used on RDIMMs. CK1 IN Negative Line Terminated but not used on RDIMMs. CKE[1:0] IN Active High CKE HIGH activates, and CKE LOW deactivates internal clock signals, and device input buffers and output drivers of the SDRAMs. Taking CKE LOW provides PRECHARGE POWER-DOWN and SELF REFRESH operation (all banks idle), or ACTIVE POWER DOWN (row ACTIVE in any bank) S[3:0] IN Active Low Enables the command decoders for the associated rank of SDRAM when low and dis- ables decoders when high. When decoders are disabled, new commands are ignored and previous operations continue. Other combinations of these input signals perform unique functions, including disabling all outputs (except CKE and ODT) of the register(s) on the DIMM or accessing internal control words in the register device(s). For modules with two registers, S[3:2] operate similarly to S[1:0] for the second set of register out- puts or register control words. ODT[1:0] IN Active High On-Die Termination control signals RAS, CAS, WE IN Active Low When sampled at the positive rising edge of the clock, CAS, RAS, and WE define the operation to be executed by the SDRAM. VREFDQ Supply Reference voltage for DQ0-DQ63 and CB0-CB7. VREFCA Supply Reference voltage for A0-A15, BA0-BA2, RAS, CAS, WE, S0, S1, CKE0, CKE1, Par_In, ODT0 and ODT1. BA[2:0] IN — Selects which SDRAM bank of eight is activated. BA0 - BA2 define to which bank an Active, Read, Write or Precharge command is being applied. Bank address also determines mode register is to be accessed during an MRS cycle. A[15:13, 12/BC,11, 10/AP,[9:0] IN — Provided the row address for Active commands and the column address and Auto Precharge bit for Read/Write commands to select one location out of the mem- ory array in the respective bank. A10 is sampled during a Precharge command to deter- mine whether the Precharge applies to one bank (A10 LOW) or all banks (A10 HIGH). If only one bank is to be precharged, the bank is selected by BA. A12 is also utilized for BL 4/8 identification for ‘’BL on the fly’’ during CAS command. The address inputs also pro- vide the op-code during Mode Register Set commands. DQ[63:0], CB[7:0] I/O — Data and Check Bit Input/Output pins DM[8:0] IN Active High Masks write data when high, issued concurrently with input data. VDD, VSS Supply Power and ground for the DDR SDRAM input buffers and core logic. VTT Supply Termination Voltage for Address/Command/Control/Clock nets. |
Similar Part No. - HMT41GV7MFR8C-H9 |
|
Similar Description - HMT41GV7MFR8C-H9 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |