MOTOR START HARDWARE

MSC SERIES

59

NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 http://www.nteinc.com

CAPACITOR HARDWARE

End Cap for On−Motor Mounting

Part

Number

Diameter (inches)

Fits Case

Style

MSCH−01

1.438

E, F, G

MSCH−02

1.810

H, J

MSCH−03

2.060

K

MSCH−04

2.560

L

End Cap for Off−Motor Mounting

Part

Number

Diameter (inches)

Fits Case

Style

MSCH−05

1.438

E, F, G

MSCH−06

1.810

H, J

MSCH−07

2.060

K

MSCH−08

2.560

L

Mounting Bracket

Part

Number

Fits Case

Style

MSCH−09

E, F

MSCH−10

H

MSCH−11

G, J, K, L

END CAP MOUNTING

When assembling directly to the motor frame, the wires are brought through the bracket hole and attached to the capacitor

terminals. Types MSCH−01, 02, 03, and 04 end caps are then placed in position and the entire assembly snapped into

place.

Off−motor mounting is similarly accomplished except the MSCH−05, 06, 07, and 08 end caps should be used to provide

for leads emerging from the opposite side of the cap without going through the bracket hole.

Use NTE p/n 2W315, a 15k 2Watt bleeder resistor, for AC motor start applications to save the relay switch contacts and

capacitor, particularly in capacitor start−run applications.