Electronic Components Datasheet Search |
|
HAA15-0.8-AG Datasheet(PDF) 5 Page - Power-One |
|
HAA15-0.8-AG Datasheet(HTML) 5 Page - Power-One |
5 / 9 page Linear Power Supplies Data Sheet MCD10016 Rev. 1.2, 13-Nov-09 Page 5 of 9 www.power-one.com Input Specifications PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS Input Voltage - AC Jumper selectable, shipped factory configured for 100 VAC Tap 87 100 110 (Note 1, 2) 120VAC operation. All models must be externally 120 VAC Tap 104 120 132 VAC fused for proper operation. Fuse ratings are marked 220 VAC Tap 191 220 242 on each unit. Consult factory for each unit’s fuse 240 VAC Tap 209 240 264 requirements. Input Frequency AC input. 47 63 Hz Line Regulation Output voltage charge for a 10% line change: F case models. -0.01 +0.01 HAD12, HAD15. -1.0 +1.0 % Outputs with adjustable three terminal regulators. -0.5 +0.5 All other models. -0.05 +0.05 NOTES: 1) Derate output current 10% for 50Hz operation. 2) Input voltage tolerance for 230VAC operation is +15%, -10%. Output Specifications PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS Output Adjustment Minimum output adjustment range (Note 1). -5 +5 % Efficiency 5 volt outputs. 45 12 volt and 15 volt outputs. 55 % 24 volt and higher outputs. 60 F case models. 3.0 mVPK-PK Ripple and Noise 5 volt, 12 volt, and 15 volt models. 5.0 mVPK-PK (Note 2) All three terminal regulator outputs. 0.2 %PK-PK 24 volt through 250 volt models. 3.0mVPK-PK plus 0.02% of output voltage, max Load Regulation Output change for a 50% load change: F case models. -0.02 +0.02 HAD12, HAD15. -1 +1 % Outputs with adjustable three terminal regulators. -0.5 +0.5 All other models. -0.05 +0.05 Transient Response Recovery time, to within 1% of initial set point due to a 50% load change. 50 μs NOTES: 1) OUTPUT VOLTAGE ADJUSTMENTS: Output voltage adjustments can be made to within ±5% of factory setting of nominal output voltage. Locate the “Vadj” potentiometer on the power supply PCB and use a screwdriver to adjust the output pot. The HAD12 and HAD15 3 terminal regulator outputs are not adjustable. 2) Full load, 20MHz bandwidth. Safety, Regulatory, and EMI Specifications PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS Agency Approvals UL60950-1. CSA 60950-1 “cUL”. Approved EN60950-1. IEC60950-1. Dielectric Withstand Input to output. 3000 VAC Voltage Input to ground. 1500 Electromagnetic FCC CFR title 47 Part 15 Sub-Part B - conducted. Interference EN55022 / CISPR 22 conducted. Compatible with system compliance to Level B. EN55022 / CISPR 22 radiated. Leakage Current Per EN60950 (264VAC) 23 50 μA Interface Signals and Internal Protection PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS Overvoltage Protection Provided on 5 volt output units where indicated. 5.8 6.6 V Other outputs may use optional overvoltage protectors OVP-12 and OVP-24. Remote Sense Total voltage compensation for cable losses with respect to the main output. 250 mV Provided on models where indicated. Overcurrent/Short Circuit Automatic current limit/foldback. Rated as a percentage of output power. 115 120 140 % Protection Master/Slave Operation For parallel operation of up to 6 units. Master/slave pin provided on F case models only. Contact factory for application notes. |
Similar Part No. - HAA15-0.8-AG |
|
Similar Description - HAA15-0.8-AG |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |