 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
AFCT-5710Z Datasheet(PDF) 2 Page - AVAGO TECHNOLOGIES LIMITED |
|
||||||||||||||||||||||||||||||
AFCT-5710Z Datasheet(HTML) 2 Page - AVAGO TECHNOLOGIES LIMITED |
|
|
2 / 19 page  2 text Photo-Detector Amplification & Quantization Laser Laser Driver & Safety Circuit Electrical Interface RD+ (Receive Data) RD- (Receive Data) Rx Loss Of Signal MOD-DEF2 (SDA) TX_DISABLE TD+ (Transmit Data) TD- (Transmit Data) TX_FAULT MOD-DEF0 MOD-DEF1 (SCL) Receiver Transmitter Optical Interface Light from Fiber Light to Fiber Controller & Memory Figure 1. Transceiver Functional Diagram Overview The AFCT-571xZ family is compliant with both IEEE 802.3Z (1000BASE-LX) and the SFP Multi-Source Agreement (MSA) specification. These transceivers are intended for premise, public and access network- ing applications. They are qualified in accordance with GR-468-CORE, and transmit data over single-mode (SM) fiber for a link distance of 10 km, in excess of the standard. The AFCT-5715Z family of optical transceivers adds digital diagnostic monitoring to standard SFP function- ality, enabling fault isolation, components monitoring and failure prediction capabilities. General Features The AFCT-571xZ is compliant to 1 GbE specifications. This includes specifications for the signal coding, optical fiber and connector types, optical and electrical trans- mitter characteristics, optical and electrical receiver characteristics, jitter characteristics, and compliance testing methodology for the aforementioned. This transceiver is capable of implementing both Single Mode (SM) and Multimode (MM) optical fiber applica- tions in that order of precedence in the event of con- flicting specifications. In addition, the SM link type exceeds the 2 m to 5 km 1000BASE-LX specification by achieving compliance over 2 m to 10 km. The MM link type is expected to meet the 62.5 μm MMF specification when used with an “offset launch” fiber. SFP MSA Compliance The product package is compliant with the SFP MSA with the LC connector option. The SFP MSA includes specifica- tions for mechanical packaging and performance as well as dc, ac and control signal timing and performance. The power supply is 3.3 V dc. The High Speed I/O (HSIO) signal interface is a Low Voltage Differential type. It is ac coupled and terminated internally to the module. The internal termination is a 100 Ohm differential load. Installation The AFCT-571xZ can be installed in or removed from any MSA-compliant Pluggable Small Form Factor (SFP) port regardless of whether the host equipment is operating or not. The module is simply inserted, electri- cal-interface first, under finger-pressure. Controlled hot- plugging is ensured by 3-stage pin sequencing at the electrical interface. This printed circuit board card-edge connector is depicted in Figure 2. As the module is inserted, first contact is made by the housing ground shield, discharging any poten- tially component-damaging static electricity. Ground pins engage next and are followed by Tx and Rx power supplies. Finally, signal lines are connected. Pin functions and sequencing are listed in Table 2. |
Similar Part No. - AFCT-5710Z_13 |
|
Similar Description - AFCT-5710Z_13 |
|
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.NET |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
