LM2591HV

SNVS074D – MAY 2001 – REVISED APRIL 2013

www.ti.com

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

ABSOLUTE MAXIMUM RATINGS

(1) (2)

63V

ON/OFF Pin Voltage

−0.3 ≤ V ≤ +25V

Feedback Pin Voltage

−0.3 ≤ V ≤ +25V

Output Voltage to Ground

(Steady State)

−1V

Power Dissipation

Internally limited

Storage Temperature Range

−65°C to +150°C

ESD Susceptibility

2 kV

Lead Temperature

KTT Package

Vapor Phase (60 sec.)

+215°C

Infrared (10 sec.)

+245°C

NDH Package (Soldering, 10 sec.)

+260°C

Maximum Junction Temperature

+150°C

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is intended to be functional, but do not ensure specific performance limits. For ensured specifications and test

conditions, see Electrical Characteristics.

(2)

If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.

(3)

The human body model is a 100 pF capacitor discharged through a 1.5k resistor into each pin.

OPERATING CONDITIONS

Temperature Range

Supply Voltage

4.5V to 60V

ELECTRICAL CHARACTERISTICS LM2591HV-3.3

Temperature Range.

Symbol

Parameter

Conditions

LM2591HV-3.3

Units

(Limits)

SYSTEM PARAMETERS Test Circuit Test Circuit and Layout Guidelines(3)

Output Voltage

4.75V

3.3

V

3.168/3.135

V(min)

3.432/3.465

V(max)

η

Efficiency

77

(1)

Typical numbers are at 25°C and represent the most likely norm.

(2)

All limits ensured at room temperature (standard type face) and at temperature extremes (bold type face). All room temperature limits

are 100% production tested. All limits at temperature extremes are ensured via correlation using standard Statistical Quality Control

(SQC) methods. All limits are used to calculate Average Outgoing Quality Level (AOQL).

(3)

External components such as the catch diode, inductor, input and output capacitors can affect switching regulator system performance.

When the LM2591HV is used as shown in Test Circuit and Layout Guidelines test circuit, system performance will be as shown in

Electrical Characteristics.

2

Submit Documentation Feedback

Copyright © 2001–2013, Texas Instruments Incorporated

Product Folder Links: LM2591HV