Electronic Components Datasheet Search |
|
MC06XSD200FK Datasheet(PDF) 1 Page - Freescale Semiconductor, Inc |
|
MC06XSD200FK Datasheet(HTML) 1 Page - Freescale Semiconductor, Inc |
1 / 60 page Document Number: MC06XSD200 Rev. 2.0, 9/2013 Freescale Semiconductor Advance Information © Freescale Semiconductor, Inc., 2013. All rights reserved. *This document contains certain information on a product under development. Freescale reserves the right to change or discontinue this product without notice Dual 6.0 mOhm High Side Switch The 06XSD200 device is part of a 36 V dual high side switch product family with integrated control and a high number of protective and diagnostic functions. It has been designed for industrial applications. The low RDS(ON) channels (<6.0 m) can control different load types; bulbs, solenoids, or DC motors. Control, device configuration, and diagnostics are performed through a 16-bit serial peripheral interface (SPI), allowing easy integration into existing applications. Both channels can be controlled individually by external/internal clock-signals or by direct inputs. Using the internal clock allows fully autonomous device operation. Programmable output voltage slew rates (individually programmable) help improve EMC performance. To avoid shutting off the device during inrush current, while still being able to closely track the load current, a dynamic overcurrent threshold profile is featured. Switching current of each channel can be sensed with a programmable sensing ratio. Whenever communication with the external microcontroller is lost, the device enters a fail-safe operation mode, but remains operational, controllable, and protected. This device is powered by SMARTMOS technology. Features • Normal operating range: 8.0 - 36 V, extended range: 6.0 - 58 V, 3.3 V and 5.0 V compatible 16-bit SPI port for device control, configuration, and diagnostics at rates up to 8.0 MHz • Two fully-protected 6.0 m (@ 25 °C) high side switches •Up to 9.0 A steady-state current per channel • Separate bulb and DC motor latched overcurrent handling • Parallel output operating mode with improved switching synchronization • Individually programmable internal/external PWM clock signals (switching frequency, duty cycle, slew rate, switch-on time-shift) • Overcurrent, short-circuit, and overtemperature protection with programmable auto-retry functions • Accurate temperature and current sensing (high/low sensing ratios/offset compensation) • OpenLoad detection (channel in OFF and ON state), also for LED applications (7.0 mA typ.) Figure 1. Simplified Application Diagram FK SUFFIX (PB-FREE) 98ASA00428D 23 PIN PQFN (12 X12 mm) 06XSD200 ORDERING INFORMATION Device Temperature Range (TA) Package MC06XSD200FK -40 to 125 °C 23 PQFN HIGH SIDE SWITCH MCU VDD CLOCK FSB SCLK CSB SO RSTB SI IN0 IN1 CSNS GND VDD VPWR HS0 HS1 LOAD I/O SCLK CSB SI I/O SO I/O I/O A/D GND LOAD M CONF0 CONF1 FSOB I/O A/D SYNC I/O 06XSD200 VDD VPWR |
Similar Part No. - MC06XSD200FK |
|
Similar Description - MC06XSD200FK |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |