PCM4104

SBAS291C − AUGUST 2003 − REVISED DECEMBER 2004

www.ti.com

2

PRODUCT

PACKAGE−LEAD

PACKAGE

DESIGNATOR

SPECIFIED

TEMPERATURE

RANGE

PACKAGE

MARKING

ORDERING

NUMBER

TRANSPORT

MEDIA, QUANTITY

PCM4104

TQFP-48

PFB

−10

°C to +70°C

PCM4104PFB

PCM4104PFBT

Tape and Reel, 250

PCM4104

TQFP-48

PFB

−10

°C to +70°C

PCM4104PFB

PCM4104PFBR

Tape and Reel, 2000

(1) For the most current package and ordering information, see the Package Option Addendum located at the end of this data sheet, or refer to

our web site at www.ti.com.

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate

precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to

damage because very small parametric changes could cause the device not to meet its published specifications.

ABSOLUTE MAXIMUM RATINGS

over operating free-air temperature range unless otherwise noted(1)

PCM4104

UNIT

Supply voltage

VCC

+6.0

V

Supply voltage

VDD

+3.6

V

Ground voltage difference

Any AGND-to-AGND and AGND-to-DGND

±0.1

V

Digital input voltage

FS0, FS1, FMT0, FMT1, FMT2, CDOUT,

CDIN, CCLK, CS, DATA0, DATA1, BCK,

LRCK, SCKI, SUB, DEM0, DEM1, MUTE,

RST, MODE

−0.3 to (VDD + 0.3)

V

Input current (any pin except supplies)

±10

mA

Operating temperature range

−10 to +70

°C

Storage temperature range, TSTG

−65 to +150

°C

(1) Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum

conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or

any other conditions beyond those specified is not implied.