IRAMS06UP60B

Series

6A, 600V

with Internal Shunt Resistor

www.irf.com

1

Features

• Internal Shunt Resistor

• Integrated Gate Drivers and Bootstrap Diodes

• Temperature Monitor

• Overcurrent shutdown

• Fully Isolated Package.

• Undervoltage lockout for all channels

• Matched propagation delay for all channels

• Schmitt-triggered input logic

• Cross-conduction prevention logic

• Lower di/dt gate driver for better noise

immunity

• Motor Power range 0.1~0.5kW / 85~253 Vac

• Isolation 2000V

Module for Appliance Motor Drive

Description

International Rectifier’s IRAMS06UP60B is an Integrated Power Module developed and optimized for

electronic motor control in appliance applications specifically for VF compressor drives for refrigerators and

freezer or in heating and ventilation as electronic fan controls. The IRAMS06UP60B offers an extremely

compact, high performance AC motor-driver in a single isolated package for a very simple design.

An internal shunt is included and offers easy current feedback and overcurrent monitor for precise control

and safe operation. A built-in temperature monitor and over-current protection, along with the short-circuit

rated IGBTs and integrated under-voltage lockout function, deliver high level of protection and fail-safe

operation. The integration of the bootstrap diodes for the high-side driver section, and the single polarity

power supply required to drive the internal circuitry, simplify the utilization of the module and deliver further

cost reduction advantages.

PD-95832 RevC

Absolute Maximum Ratings

Note 1: Limited by current protection, see table "Inverter Section Electrical Characteristics" on page 3

Parameter

Description

Max. Value

Units

Maximum IGBT Blocking Voltage

600

Positive Bus Input Voltage

450

RMS Phase Current

6

RMS Phase Current

3

Max Peak Phase Current (tp<100ms) (see Note 1)

9

Maximum PWM Carrier Frequency

20

kHz

Maximum Power dissipation per Phase

7.5

W

Isolation Voltage (1min)

2000

Operating Junction temperature Range

-40 to +150

Operating Junction temperature Range

-40 to +150

T

Mounting torque Range (M3 screw)

0.8 to 1.0

Nm

A

°C

V