MKE02Z16VLD2 datasheet(1/36 Pages) FREESCALE

Part #	MKE02Z16VLD2

Description	Operating characteristics : Flash write voltage range: 2.7 to 5.5 V

Download	36 Pages

Scroll/Zoom	100%

Manufacturer	FREESCALE [Freescale Semiconductor, Inc]

Direct Link	http://www.freescale.com

Logo

1 / 36 page

MKE02P64M20SF0

KE02 Sub-Family

Supports the following:

MKE02Z16VLC2(R),

MKE02Z32VLC2(R),

MKE02Z64VLC2(R),

MKE02Z16VLD2(R),

MKE02Z32VLD2(R),

MKE02Z64VLD2(R),

MKE02Z32VLH2(R),

MKE02Z64VLH2(R),

MKE02Z32VQH2(R), and

MKE02Z64VQH2(R)

Key features

• Operating characteristics

– Voltage range: 2.7 to 5.5 V

– Flash write voltage range: 2.7 to 5.5 V

– Temperature range (ambient): -40 to 105°C

• Performance

– Up to 20 MHz ARM® Cortex-M0+ core

– Single cycle 32-bit x 32-bit multiplier

– Single cycle I/O access port

• Memories and memory interfaces

– Up to 64 KB flash

– Up to 256 B EEPROM

– Up to 4 KB RAM

• Clocks

– Oscillator (OSC) - loop-controlled Pierce

oscillator, crystal or ceramic resonator range of

31.25 kHz to 39.0625 kHz or 4 MHz to 20 MHz

– Internal clock source (ICS) - internal FLL with

internal or external reference, precision

trimming of internal reference allowing 1%

deviation across temperature range of 0 °C to

70 °C and 1.5% deviation across temperature

range of -40 °C to 105 °C, up to 20 MHz

– Internal 1 kHz low-power oscillator (LPO)

• System peripherals

– Power management module (PMC) with three

power modes: Run, Wait, Stop

– Low-voltage detection (LVD) with reset or

interrupt, selectable trip points

– Watchdog with independent clock source

(WDOG)

– Programmable cyclic redundancy check module

(CRC)

– Serial wire debug interface (SWD)

– Bit manipulation engine (BME)

• Security and integrity modules

– 64-bit unique identification (ID) number per chip

• Human-machine interface

– Up to 57 general-purpose input/output (GPIO)

– Two 8-bit keyboard interrupt modules (KBI)

– Interrupt (IRQ)

• Analog modules

– One 16-channel 12-bit SAR ADC, operation in

Stop mode, optional hardware trigger (ADC)

– Two analog comparators containing a 6-bit

DAC and programmable reference input

(ACMP)

• Timers

– One 6-channel FlexTimer/PWM (FTM)

– Two 2-channel FlexTimer/PWM (FTM)

– One 2-channel periodic interrupt timer (PIT)

– One real-time clock (RTC)

Freescale Semiconductor

Document Number MKE02P64M20SF0

Data Sheet: Technical Data

Rev 3, 07/2013

Freescale reserves the right to change the detail specifications as may be

required to permit improvements in the design of its products.

Similar Part No. - MKE02Z16VLD2

Manufacturer	Part #	Datasheet	Description
NXP Semiconductors	MKE02Z16VLD2	845Kb / 38P	Power management module (PMC) with three power modes: Run, Wait, Stop Rev. 7, 12/2019
NXP Semiconductors	MKE02Z16VLD2R	845Kb / 38P	Power management module (PMC) with three power modes: Run, Wait, Stop Rev. 7, 12/2019

More results

Similar Description - MKE02Z16VLD2

Manufacturer	Part #	Datasheet	Description
EHAOAN.	HS1538S	1Mb / 8P	Operating voltage: 2.7-5.5 v
EHAOAN.	HS1838T-B-C	1Mb / 8P	Operating voltage: 2.7 V -5.5 V
Fairchild Semiconductor	FPF1048BUCX	405Kb / 3P	Input Voltage Operating Range: 1.5 V to 5.5 V
Freescale Semiconductor...	KL26P121M48SF4	1Mb / 60P	Operating Characteristics Voltage range: 1.71 to 3.6 V
Cypress Semiconductor	CY8C20X36A	1Mb / 43P	CapSense Applications Operating Range: 1.71 V to 5.5 V
Texas Instruments	SN74AHCT1G02DBVR	867Kb / 13P	[Old version datasheet] Operating Range of 4.5 V to 5.5 V, Inputs Are TTL-Voltage Compatible
EHAOAN.	HS1838B-C	1Mb / 8P	Operating voltage: 2.7 v -5.5v
EHAOAN.	HS1538B-C	1Mb / 8P	Operating voltage: 2.7 v -5.5v
Infineon Technologies A...	6EDL7141	8Mb / 132P	5.5 V to 60 V operating supply voltage (recommended operating condition) Revision 1.00 2021-06-02
EHAOAN.	HS1538B-D	1Mb / 8P	Operating voltage: 2.2 v -5.5

More results

MKE02Z16VLD2 Datasheet(PDF) 1 Page - Freescale Semiconductor, Inc

MKE02Z16VLD2 Datasheet(HTML) 1 Page - Freescale Semiconductor, Inc

Similar Part No. - MKE02Z16VLD2

Similar Description - MKE02Z16VLD2

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Datasheet Download

Link URL