DATASHEET | SEPTEMBER 2013

FIBER OPTICS

| REV 2013.09

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

Laser Safety Information

This component product does not meet the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class IIIb laser product

based on the maximum optical output power defined below. During use as intended, the laser energy is fully contained within the fiber

network such that there is no accessible laser radiation and would meet the requirements for a Class I laser product.

Wavelength = 1532 ~ 1565 nm (dependent on input source)

Maximum Output Power = 200 mW

MAFA 1014-PA Optical Preamplifier

Erbium Doped Fiber Preamplifier