DATASHEET | DECEMBER 2013

FIBER OPTICS

| REV 2013.12

Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.

Applications

High-Performance Supertrunking Links

Optical Distribution Networks

Redundant Ring Architectures

FTTx Networks.

Features

Full Functionality 1 RU EDFA (pre-Amp)

Low Noise Figure (Typ < 3.3 dB)

Total Input Power Range:

-45 dBm to 0 dBm

+14 dBm Saturated Output Power (min)

Small Signal Gain 37 dB (min)

Standard RS-232 Communications

Key Lock Switch

VFD Panel Status Indicator

Low Electrical Power Consumption

Output Isolation >40 dB

Polarization Dependant Gain < 0.1 dB

Polarization Mode Dispersion < 0.5 ps

The EMCORE PONA 2114 PA Series Erbium Doped Fiber pre-Amplifier (EDFA)

is an ideal building block for OEM system integrators. The family of PONA 2114

PA series preamps is designed to meet the most demanding noise performance

requirements of any fiber link application, and perform all the functions required

of an optical pre-Amplifier for system integration. The PONA 2114 PA series

provides optical isolation on the output of the gain block for stable, low noise

operation. The output optical signal power levels are detected for monitoring and

control. The PONA 2114 PA series also provides monitors and associated

alarms for all vital characteristics. The relay outputs of the PONA 2114 PA series

provide electrical monitoring of alarm conditioning of the unit.

General and Mechanical Specifications

Property

Requirement

Comments

Operating Wavelength

1530 – 1562 nm

Standard

Operating Case Temperature

0

C to 50C

Storage Temperature

-40

C to 85C

Standard

Operating Humidity

20% to 85%

Non-condensing

Voltage Supply Range

85 VAC to 265 VAC 50/60 Hz

-36 to -60 V DC

Standard

Optional

Optical Connectors

SC/APC; SC/UPC; FC/APC;

FC/UPC; E2000/APC

User Specified

Dimensions in Inches

19.0”W x 14.76”D x 1.72”H

19” Rack-Mounted, 1U

PONA 2114 PA Series EDFA

Erbium Doped Fiber pre-Amplifier