8

Table 8. Package Characteristics

Parameter

Symbol

Min

Typ

Max

Units

Test Conditions

Input-Output Momentary

Withstand Voltage

5000

Vrms

Notes 1 to 3

Input-Output Resistance

:

Input-Output Capacitance

0.6

pF

Notes:

1. The input-output momentary withstand voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous voltage

rating. For the continuous voltage rating refer to the IEC/EN/DIN EN 60747-5-5 Insulation Characteristics Table (if applicable), your equipment level

safety specification, or Avago Application Note 1074, Optocoupler Input-Output Endurance Voltage.

2. Device considered a two terminal device: pins 1, 2, 3, 4 connected together, and pins 5, 6, 7, 8 connected together.

3. In accordance with UL 1577, each optocoupler is proof tested by applying an insulation test voltage ≥ 6000 Vrms for 1 second (leakage detection

PA).