© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com

As detailed in the KEMET Surface Mount Catalog F3102 for C0G, with following specific requirements based on room

temperature (25°C) parameters:

•

Operating Range: -55°C to +125°C, with no-bias capacitance shift limited to ± 30 PPM/°C over that range.

•

Insulation Resistance (IR) measured after 2 minutes at rated voltage @ 25°C: Limit is 1000 megohm microfarads or

100G

Ω, whichever is less.

•

Capacitance and Dissipation Factor (DF) measured at the following conditions.

Capacitance - 1 kHz and 1 vrms if capacitance >1000 pF

1 MHz and 1 vrms if capacitance

≤ 1000 pF

DF Limit is 0.1%.

Components are suitable for wave and IR reflow soldering except extended 1210 values which are suitable

for IR reflow only. All parts incorporate the standard KEMET barrier layer of pure nickel, with an overplate of

pure tin to provide excellent solderability as well as resistance to leaching. (Please refer to KEMET catalog

F3102 for additional soldering information and recommendations.)

These chips will be supplied unmarked. However, marking is available as an extra cost option.

AEC-Q200 Rev. C - Automotive

RoHS 6/6 - 100% tin termination

Electrical Parameters

Soldering Process

Marking

Qualification/Certification

In general, the information in the KEMET Surface Mount catalog F3102 applies to these capacitors.

The information in this bulletin supplements that in the catalog.