(1/4)

004-02 / 20060720 / e9613_acf.fm

• All specifications are subject to change without notice.

3-terminal Filters(SMD)

For Signal Line

ACF Series ACF321825, 451832 Types

FEATURES

• The ACF series consists of products with superior attenuation

characteristics, in which the T-type filter circuit is magnetically

shielded with ferrite.

• The series offers even greater attenuation characteristics when

used in a stable circuit on the ground.

• The ACF series is ideal for high-density circuit design, since the

series is vertically mounted and does not require much mounting

space.

• Available for reflow soldering.

• It is a product conforming to RoHS directive.

PRODUCT IDENTIFICATION

(1) Series name

(2) Dimensions

(3) Type

(4) Packaging style

TEMPERATURE RANGES

PACKAGING STYLE AND QUANTITIES

HANDLING AND PRECAUTIONS

• Before soldering, be sure to preheat components. The preheat-

ing temperature should be set so that the temperature difference

between the solder temperature and product temperature does

not exceed 150°C.

• After mounting components onto the printed circuit board, do not

apply stress through board bending or mishandling.

• The inductance value may change due to magnetic saturation if

the current exceeds the rated maximum.

• Do not expose the inductors to stray magnetic fields.

• Avoid static electricity discharge during handling.

• When hand soldering, apply the soldering iron to the printed cir-

cuit board only. Temperature of the iron tip should not exceed

350°C. Soldering time should not exceed 3 seconds.

Conformity to RoHS Directive

ACF

321825 - 223 - T

(1)

(2)

(3)

(4)

Operating/Storage

–25 to +85°C

Packaging style

Quantity

Taping

1000 pieces/reel

• Please contact our Sales office when your application are considered the following:

The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)

• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific

bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.