Multipurpose Boxes

Page <1>

07/05/12 V1.1

www.element14.com

www.farnell.com

www.newark.com

Features:

• The LID and base incorporate a tongue and groove sealing

system with a neoprene gasket

• Wall mounting holes and LID fixing screws are outside the

sealing area thus preventing the ingress of moisture and dust

• Designed to IP 65 of IEC 529 and nema 4 (dust and hoseproof)

• Internal guide slots for mounting PCB assemblies vertically

• Bosses on internal base allow fixing of PCB's horizontally or

connection of terminals, etc into threaded brass inserts

• LID fixing screw are M-4 stainless steel (nonmagnetic) into

threaded brass inserts

• High impact ABS material moulded in dark grey colour. They

are easily drilled or punched. Making them Ideal for use in the

electrical and electronics industries as circuit enclosures and

junctions boxes

IP65, Polycarbonate Material

Specification Table

Height

Width

Depth

Wall

Thickness

Moulded In

Operating

Temperature

Part Number

50

52

35

3

Light grey

(IP65, polycarbonate material)

-40°C to +125°C

G250

80

82

55

G256

160

G258

120

200

75

G269

120

90

G279

160

160

60

G287

90

G288

Dimensions : Millimetres

Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of

it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces

all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use

made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.

Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)

is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.