TB-2055 Page 4 of 4

© 2011 DESCO INDUSTRIES INC.

Employee Owned

DESCO WEST

- 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Fax (909) 627-7449

DESCO EAST

- One Colgate Way, Canton, MA 02021-1407 • (781) 821-8370 • Fax (781) 575-0172 • Web Site: Desco.com

LIMITED WARRANTY

Desco expressly warrants that for a period of two (2) years from the

date of purchase or (100) one hundred wash cycles, whichever occurs

first, Desco Statshield® ESD Smocks will be free of defects in material

(parts) and workmanship (labor). Within the warranty period, a credit

for purchase of replacement Desco Statshield® ESD Smocks, or, at

our option, the Statshield® ESD Smock will be repaired or replaced

free of charge. If product credit is issued, the amount will be calculated

by multiplying the unused portion of the expected two year or 100

wash cycle life times the original unit purchase price. Call Customer

Service at 909-627-8178 for a Return Material Authorization (RMA) and

proper shipping instructions. You should include a copy of your original

packing slip, invoice, or other proof of purchase date. Any unit under

warranty should be shipped prepaid to the Desco factory. Warranty

repairs will take approximately two weeks.

If your unit is out of warranty, call Customer Service at 909-627-8178

(Chino, CA) or 781-821-8370 (Canton, MA) for a Return Material

Authorization (RMA) and proper shipping instructions and address.

Desco will quote repair charges necessary to bring your unit up to

factory standards.

WARRANTY EXCLUSIONS

THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU

OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED AND

IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE WHICH ARE SPECIFICALLY DISCLAIMED.

The express warranty will not apply to defects or damage due to

accidents, neglect, misuse, alterations, operator error, or failure to

properly maintain, clean or repair products.

LIMIT OF LIABILITY

In no event will Desco or any seller be responsible or liable for any

injury, loss or damage, direct or consequential, arising out of the use of

or the inability to use the product. Before using, users shall determine

the suitability of the product for their intended use, and users assume

all risk and liability whatsoever in connection therewith.

The carbon-suffused mono-filament nylon is sensitive to

heat and should not be exposed to laundering heat in

excess of 120°F. Use only non-ionic softeners and

detergents when laundering. Under normal wearing and

recommended washing conditions, Desco Statshield® ESD

protective smocks will maintain their usefulness and

effectiveness for a minimum of 100 washings. Some other

ESD smocks have as little as 1% suffused carbon and lose

their ESD protective qualities after a few washings.

Specifications

Fabric Weight

2.2 oz per square yard

Fabric Content

Texturized polyester and a

minimum of 9% carbon

mono-filament nylon.

Carbon Mono-filament

Conductive at 10E4 ohms,

nonflaking and non-sloughing.

Surface Resistance

10E5 - 10E6 ohms, per

ESD-STM2.1 of Fabric

Static Decay Rate

5000 volts to 500 volts in less

than 0.1 seconds, per FTMS-101C

Glass Transition Temp

250°F

Flash Point

1040°F

Note: Material sample swatches are available upon

request. Fabric lots vary slightly in color and weight. If

you have any question please don’t hesitate to request

a sample material from our Customer Service Team.