© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com

T2019_T530 • 2/3/2014

88

KEMET Organic Capacitor (KO-CAP) – T530 High Capacitance/125°C Rated Polymer Tantalum

Reverse Voltage

Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.

These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table.

Temperature

Permissible Transient Reverse Voltage

25°C

15% of Rated Voltage

55°C

10% of Rated Voltage

85°C

5% of Rated Voltage

105°C

3% of Rated Voltage

125°C*

1% of Rated Voltage

*For series rated to 125°C

Table 2 – Land Dimensions/Courtyard

KEMET

Metric

Size

Code

Density Level A:

Maximum (Most) Land

Protrusion (mm)

Density Level B:

Median (Nominal) Land

Protrusion (mm)

Density Level C:

Minimum (Least) Land

Protrusion (mm)

Case

EIA

W

L

S

V1

V2

W

L

S

V1

V2

W

L

S

V1

V2

A

3216–18

1.35

2.20

0.62

6.02

2.80

1.23

1.80

0.82

4.92

2.30

1.13

1.42

0.98

4.06

2.04

B

3528–21

2.35

2.21

0.92

6.32

4.00

2.23

1.80

1.12

5.22

3.50

2.13

1.42

1.28

4.36

3.24

C

6032–25

2.35

2.77

2.37

8.92

4.50

2.23

2.37

2.57

7.82

4.00

2.13

1.99

2.73

6.96

3.74

D

7343–31

2.55

2.77

3.67

10.22

5.60

2.43

2.37

3.87

9.12

5.10

2.33

1.99

4.03

8.26

4.84

L

6032-19

2.35

2.77

2.37

8.92

4.50

2.23

2.37

2.57

7.82

4.00

2.13

1.99

2.73

6.96

3.74

M

3528-15

2.35

2.20

0.92

6.32

4.00

2.23

1.80

1.12

5.22

3.50

2.13

1.42

1.28

4.36

3.24

H

7360-20

4.25

2.77

3.67

10.22

7.30

4.13

2.37

3.87

9.12

6.80

4.03

1.99

4.03

8.26

6.54

7360–38

4.25

2.77

3.67

10.22

7.30

4.13

2.37

3.87

9.12

6.80

4.03

1.99

4.03

8.26

6.54

Q

7343-12

2.55

2.77

3.67

10.22

5.60

2.43

2.37

3.87

9.12

5.10

2.33

1.99

4.03

8.26

4.84

2012-12

1.05

1.83

0.15

4.82

2.50

0.93

1.50

0.22

3.72

2.00

0.83

1.12

0.38

2.86

1.74

3216–12

1.35

2.20

0.62

6.02

2.80

1.23

1.80

0.82

4.92

2.30

1.13

1.42

0.98

4.06

2.04

T

3528–12

2.35

2.20

0.92

6.32

4.00

2.23

1.80

1.12

5.22

3.50

2.13

1.42

1.28

4.36

3.24

U

6032–15

2.35

2.77

2.37

8.92

4.50

2.23

2.37

2.57

7.82

4.00

2.13

1.99

2.73

6.96

3.74

V

7343–20

2.55

2.77

3.67

10.22

5.60

2.43

2.37

3.87

9.12

5.10

2.33

1.99

4.03

8.26

4.84

W

7343–15

2.55

2.77

3.67

10.22

5.60

2.43

2.37

3.87

9.12

5.10

2.33

1.99

4.03

8.26

4.84

7343–43

2.55

2.77

3.67

10.22

5.60

2.43

2.37

3.87

9.12

5.10

2.33

1.99

4.03

8.26

4.84

7343–40

2.55

2.77

3.67

10.22

5.60

2.43

2.37

3.87

9.12

5.10

2.33

1.99

4.03

8.26

4.84

Density Level A: For low-density product applications. Recommended for wave solder applications and

provides a wider process window for reflow solder processes.

Density Level B: For products with a moderate level of component density. Provides a robust solder

attachment condition for reflow solder processes.

Density Level C: For high component desity product applications. Before adapting the minimum land

pattern variations the user should perform qualification testing based on the conditions outlined in IPC

standard 7351 (IPC–7351).

¹ Height of these chips may create problems in wave soldering.

2

Land pattern geometry is too small for silkscreen outline.