Electronic Components Datasheet Search |
|
B1501RU Datasheet(PDF) 2 Page - MicroPower Direct, LLC |
|
B1501RU Datasheet(HTML) 2 Page - MicroPower Direct, LLC |
2 / 2 page Model Selection Guide Mechanical Dimensions Model Number Input Reflected Ripple Current (mA, Typ) Output Efficiency (%, Typ) Capacitive Load (µF Max) Fuse Rating Slow-Blow (mA) Voltage (VDC) Current (mA) Voltage (VDC) Current (mA, Max) Current (mA, Min) Nominal Range Full-Load No-Load B1501RU 24 9.0 - 36.0 528 25 40 3.3 3,000 300.0 78 470 2,500 B1502RU 24 9.0 - 36.0 762 25 40 5.0 3,000 300.0 82 470 2,500 B1503RU 24 9.0 - 36.0 735 25 40 12.0 1,250 125.0 85 470 2,500 B1504RU 24 9.0 - 36.0 726 25 40 15.0 1,000 100.0 86 470 2,500 B1505RU 24 9.0 - 36.0 753 25 40 ±5.0 ±1,500 ±150.0 81 ±220 2,500 B1506RU 24 9.0 - 36.0 735 25 40 ±12.0 ±625 ±62.5 85 ±220 2,500 B1507RU 24 9.0 - 36.0 726 25 40 ±15.0 ±500 ±50.0 86 ±220 2,500 B1511RU 48 18.0 - 75.0 264 15 30 3.3 3,000 300.0 78 470 1,250 B1512RU 48 18.0 - 75.0 381 15 30 5.0 3,000 300.0 82 470 1,250 B1513RU 48 18.0 - 75.0 368 15 30 12.0 1,250 125.0 85 470 1,250 B1514RU 48 18.0 - 75.0 363 15 30 15.0 1,000 100.0 86 470 1,250 B1515RU 48 18.0 - 75.0 376 15 30 ±5.0 ±1,500 ±150.0 81 ±220 1,250 B1516RU 48 18.0 - 75.0 368 15 30 ±12.0 ±625 ±62.5 85 ±220 1,250 B1517RU 48 18.0 - 75.0 363 15 30 ±15.0 ±500 ±50.0 86 ±220 1,250 Notes: 1. An internal filter that complies with EN55022 Class “A” is available.Add a suffix “-F” to the model number 2. When measuring output ripple, it is recommended that an external 4.7 µF ceramic capacitor be placed from the +Vout pin to the -Vout pin for single output units and from each output to common for dual output units. 3. Transient recovery is measured to within a 1% error band for a load step change of 75% to 100%. 4. The maximum control current at the on/off pin (pin 6) during a logic high is 50 µA.The maximum control current to the on/off pin at logic low (-0.7V to 0.8V) is 1 mA. If the on/off pin is left open, the unit operates. If it is grounded, the unit will shut off. 5. Operation at no-load will not damage these units. However, they may not meet all specifications. 6. Dual output units may be connected to provide a 10 VDC, 24 VDC or 30 VDC output. To do this, connect the load across the positive (+Vout) and negative (-Vout) outputs and float the output common. 7. The converter should be connected to a low ac-impedance source.An input source with a highly inductive impedance may affect the stability of the converter. In applications where the converter output loading is high and input power is supplied over long lines, it may be necessary to use a capacitor on the input to insure start-up. In this case, it is recommended that a low Equivalent Series Resistance (ESR <1.0 at 100 kHz) capacitor be mounted close to the converter. A 10.0 µF is recommended. 8. It is recommended that a fuse be used on the input of a power supply for protection. See the table above for the correct rating. Heatsink Notes: • Use of the heatsink will extend the units operating temperature range by approximately 10°C. • The heatsink is black anodized aluminum. MicroPower Direct We Power Your Success - For Less! 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com Pin Single Dual Pin Single Dual 1 +Vin +Vin 4 No Pin Comm. 2 -Vin -Vin 5 -Vout -Vout 3 +Vout +Vout 6 ON/OFF ON/OFF Pin Connections Heatsink Dimensions (Optional) For heatsink option, add suffix “H” to model number (i.e. B1503RU-H) www.micropowerdirect.com For Remote Control option, add suffix “R” to model number (i.e. B1503RU-R) Mechanical Notes: • All dimensions are typical in inches (mm) • Tolerance x.xx = ±0.01 (±0.25) Derating Curve For Class “A” filter option, add suffix “F” to model number (i.e. B1503RU-F) |
Similar Part No. - B1501RU |
|
Similar Description - B1501RU |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |