UB244A

Preliminary

CMOS IC

UNISONICTECHNOLOGIESCO.,LTD

5 of 11

www.unisonic.com.tw

QW-R502-857.a

OPERATING

1. Overcharge Detection

CO is turned to “H” (for CMOS output active “H”) when the voltage of one of the batteries exceeds the overcharge

This state is called “overcharge.” Attaching FET to the CO pin provides charge control and a second protection. At

that time, the overcharge state is maintained until the voltage of all batteries decreases from the overcharge

2. Delay Circuit

by the following equations：

TIMING CHARTS

Battery voltage

V1 Battery

V2 Battery

V3 Battery

V4 Battery

CO pin voltage

ICT pin voltage

VSS

VSS

VSS

VCC

VDET

CMOS output active “H” and

Nch open drain models

VCC