 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
DS2154LN Datasheet(PDF) 1 Page - Dallas Semiconductor |
|
||||||||||||||||||||||||||||||
DS2154LN Datasheet(HTML) 1 Page - Dallas Semiconductor |
|
|
1 / 87 page  1 of 87 112099 FEATURES Complete E1(CEPT) PCM-30/ISDN-PRI transceiver functionality Onboard long- and short-haul line interface for clock/data recovery and waveshaping 32-bit or 128-bit crystal-less jitter attenuator Generates line build outs for both 120 Ω=and 75 Ω=lines Frames to FAS, CAS, and CRC4 formats Dual onboard two-frame elastic store slip buffers that can connect to asynchronous backplanes up to 8.192 MHz 8-bit parallel control port that can be used directly on either multiplexed or non-multiplexed buses Extracts and inserts CAS signaling Detects and generates Remote and AIS alarms Programmable output clocks for Fractional E1, H0, and H12 applications Fully independent transmit and receive functionality Full access to both Si and Sa bits aligned with CRC multiframe Four separate loopbacks for testing functions Large counters for bipolar and code violations, CRC4 codeword errors, FAS errors, and E bits Pin compatible with DS2152 T1 Enhanced Single- Chip Transceiver 5V supply; low power CMOS 100-pin 14mm 2 body LQFP package PACKAGE OUTLINE ORDERING INFORMATION DS2154L (0°C to 70°C) DS2154LN (-40°C to +85°C) DESCRIPTION The DS2154 Enhanced Single-Chip Transceiver (ESCT) contains all of the necessary functions for connection to E1 lines. The device is an upward compatible version of the DS2153 Single-Chip Transceiver. The onboard clock/data recovery circuitry coverts the AMI/HDB3 E1 waveforms to a NRZ serial stream. The DS2154 automatically adjusts to E1 22AWG (0.6 mm) twisted-pair cables from 0 to over 2 km in length. The device can generate the necessary G.703 waveshapes for both 75-ohm coax and 120-ohm twisted cables. The onboard jitter attenuator (selectable to either 32 bits or 128 bits) can be placed in either the transmit or receive data paths. The framer locates the frame and multiframe boundaries and monitors the data stream for alarms. It is also used for extracting and inserting signaling data, Si, and Sa bit information. The device contains a set of internal registers which the user can access to control the operation of the unit. Quick access via the parallel control port allows a single controller to handle many E1 lines. The device fully meets all of the latest E1 specifications including ITU G.703, G.704, G.706, G.823, G.932, and I.431 as well as ETS 300 011, 300 233, 300 166, TBR 12 and TBR 13. DS2154 Enhanced E1 Single Chip Transceiver www.dalsemi.com 1 |
Similar Part No. - DS2154LN |
|
Similar Description - DS2154LN |
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.NET |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
