Serial ATA Flash Drive

APS25M5Axxxx-ACMX

1

© 2011 Apacer Technology Inc.

Rev. 1.1

Features:

Standard Serial ATA 2.6 (Gen. 2)

–

Serial ATA 2.6 (Gen. 2)

–

SATAⅡ, 3.0 Gbps

–

ATA-compatible command set

Capacities

–

8, 16, 32, 64, 128 GB

Performance*

–

–

Sustained read: up to 155 MB/sec

–

Sustained write: up to 80 MB/sec

Intelligent endurance design

–

Built-in hardware ECC, enabling up to

16/24 bit correction per 1K bytes

–

Static wear-leveling scheme together

with dynamical block allocation to

significantly increase the lifetime of a

flash device and optimize the disk

performance

–

Flash bad-block management

–

S.M.A.R.T.

–

Power Failure Management

–

ATA Secure Erase

–

TRIM

NAND Flash Type: MLC

Data integrity under power-cycling

–

No battery required for data storage

Temperature ranges

–

Operation:

Standard: 0°C to 70°C (32 ~ 158°F)

Extended: -40 ~ +85°C (-40° ~ 185°F)**

–

Storage: -40°C to 100°C (-40° ~ 212°F)

Supply voltage

–

5.0 V ± 5%

Power consumption (typical)*

–

Active mode: 310 mA

–

Idle mode: 86 mA

Form factor

–

2.5 inch” (70.00 x 48.66 x 9.25***, unit: mm)

Connector

–

7-pin SATA signal connector

–

15-pin SATA power connector

Shock & Vibration

–

Shock: 50g (approx., non-operating)

–

Vibration: 15g (approx.)

RoHS compliant

*Varies from capacities. The values addressed for Performance and Power consumptions are typical and may vary depending on settings

and platforms.

**Only available in 16, 32, 64GB capacities. For details, please see “Product Ordering Information”.

***Including the width of the side bracket. Please see “Physical Characteristics” for details.