The copyright and authority for the interpretation of the products are reserved by MORNSUN

TExxxxN

2013.04.25-A/0

Page 5 of 6

AFTER-SALES SERVICE

1. Products are carefully inspected and quality controlled during production and before shipment. If they operated abnormally or there was anything

wrong, please contact our agent from which you purchased or MORNSUN FAE as soon as possible.

2. MORNSUN warranty our product for 3 years from manufacturing date. During this period, MORNSUN will repair or replace the product if product

was found to have manufacturing defect.

APPLICATION CIRCUIT

Please check

“ A APPLICATION GUIDE TO ISOLATION TRANSMITTER”

DIMENSIONS, RECOMMENDED FOOTPRINT & PACKAGING

Note:

1. All specifications measured at Ta=25

°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.

2. In this datasheet, all the test setup and methods are based on our corporate standards.

3. All characteristics are for listed models, and non-standard models may perform differently. Please contact our technical support for more details.

4. Contact us for your specific requirement.

5. Specifications of this product are subject to changes without prior notice.

MORNSUN Science & Technology Co.,Ltd.

Address: No. 5, Kehui St. 1, Kehui development center, Science Ave., Guangzhou Science City, Luogang district, Guangzhou,P.R.China.

Tel: 86-20-38601850

Fax:86-20-38601272

E-mail: info@mornsun.cn

Http://www.mornsun-power.com