S0434. Rev.01 (web). 2014-05-16

Product Description

CP21C0XSRC000xG

Pb

The CP21C0XSRC000xG is a hot pluggable fiber optic transceiver in the CFP2

form factor with digital diagnostics monitoring functionality (DDM) and control

functions. Supporting 100GBase-SR10 Ethernet standard and OTU4 data rates

makes it ideally suited for 100G applications where cost effective high port

density is needed. It offers doubled port density of 100G-SR10 CFP transceivers.

The control and status reporting functions are integrated into the design via

a set of non-data hardware signal pins and Management Date Input/Output

(MDIO) interface per the CFP2 Multi-Source Agreement.

The transceiver supports an aggregate bandwidth of 100G over 100 meters

of optical fiber. Each lane transmits and receives data streams at data rates up

to 11.1809Gbps. The CFP transceiver has a single MPO port which connects

to an industry standard 2x12 multi-mode fiber cable. It provides an excellent

solution for 100GbE/OTU4 data transmission at 850nm over up to 100m

multimode mode ribbon cables. The low power consumption and excellent

EMI performance enable system design with high port density. The product

is designed and tested in accordance with industry safety standards. The

transceiver is Class I Laser product per U.S. FDA/CDRH and IEC 60825-1:2007 &

IEC 60825-2:2004+A1+A2 standards.

The CP21C0XSRC000xG transceiver connects to standard 104-pin CFP2

connectors for hot plug capability. This allows system designers to make

configuration changes or maintenance by simply plugging in different

transceivers without removing the power supply from the host system. The

transmitter and receiver DATA interfaces are internally AC-coupled. LV-CMOS

Transmitter Disable control input and Loss of Signal (LOS) output interfaces are

also provided.

The transceiver can be conveniently assembled into and released from the host

system through the latch.

The transceiver operates from a single +3.3V power supply over an operating

case temperature range of -5°C to +70°C. The housing is made of metal for EMI

immunity.



Integrated 10 independent full duplex lanes



Transmission distance up to 100m (OM4 fiber)



CFP2 form factor for doubled port density than

CFP



Compliant to 100Gbase-SR10 specifications



Support data transmission up to 111.809Gb/s



Support CAUI proposals



Status reporting and control functions through

the MDIO interface



RoHS 6/6 compliant



Laser Class 1 IEC/CDRH compliant

Features

Ordering Information

100G-SR10 CFP2 Transceiver

Model Name

Operating Temperature

Nominal

Wavelength

Supported Data Rate

(Gb/s)

Distance

Latch

Color

CP21C0XSRC000E1G

- 5°C to +70°C

Commercial

850

103.125

100m

Beige

CP21C0XSRC000E2G

- 5°C to +70°C

Commercial

850

103.125 and 111.809

100m

Beige