TW150 Series

150W Multiple Outputs AC/DC Power Supplies

TRUMPower

Tumbler Technologies + TRUMPower

3350 Scott Blvd., Building 13 • Santa Clara, California 95054, USA • 408-988-6616 • sales@trumpower.com • www.TRUMPower.com

ELECTRICAL SPECIFICATIONS

Input Voltage ........................ 90~264 VAC

Input Frequency ................... 47~63 Hz

Input Current ........................ 2.5A (rms) @ 115 VAC,

1.25A (rms) @ 230 VAC max.

Inrush Current ..................... 40A max. @ 115 VAC or 80A max.

@ 230 VAC at cold start 25°C

Power Factor ....................... 0.95 @ 115 VAC,

0.90 @ 230 VAC, typical

Maximum Output Power ...... 150W @ 30 CFM forced air

120W @ convection on Open PCB

130W @ convection on U-bracket

Output Power Ratings ......... See table

Ripple and Noise ................ See table

STANDARDS & COMPLIANCES

EMC Standards ................... EN55022, FCC, CISPR22, Class B

Safety Standards ................. UL60950-1 2nd Ed., EN60950-1

Agency Approvals ................ cUS, TUV, CB, CE

Other Compliance ............... RoHS

FEATURES

• 90~264 VAC Universal Input

• Active PFC with PF up to 0.99

• 3" x 5" Open PCB or U-Bracket

• 1.36" (Open PCB) or 1.57" (U-Bracket) Low Profile

• 3.3V to 48V Flexible DC Output Combination

• Over-Temperature Protection

MECHANICAL SPECIFICATIONS

GENERAL SPECIFICATIONS

Efficiency ................................... 80% typical at full load, 115 VAC

Switching Frequency ................ 60 KHz

Hold-up Time ............................ 16ms min. at full load, 115 VAC

nominal line

Operating Temperature ............ 0°C to +60°C

Derating .................................... Derate from 100% at +40°C

linearly to 50% at +60°C

Storage Temperature ................ -40°C to +85°C

Temperature Coefficient ........... ±0.05%/°C

Operating Humidity ................... 5% to 95% non-condensing

Short-Circuit Protection ............ Shut-down with auto-recovery

Over-Load Protection ................ Protected at 110% to 160%

above following max. rating

Over-Temperature Protection ... Automatic shutdown; the

temperature sensing point is

located at HS1; OTP threshold

is 88±4°C

MTBF ......................................... 100K hrs min. at full load and

25°C ambient temperature

Open PCB Type

Notes

1. Dimensions shown in mm.

2. CN1: AC Input JST B3P-VH-B or equivalent, mates with JST VHR-3N or equivalent

3. CN2: DC Output JST B11P-VH-B or equivalent, mates with JST VHR-11N or equivalent.

4. Weight: 0.39 kgs (Open PCB type), 0.5 kgs (U-Bracket type)

CN2

1

11

U-Bracket Type

1

11

CN2