Wall Industries, Inc.

Rev B

PSAE800 SERIES

Up to 804 Watts, AC/DC Switching Power Supplies

07/23/2013

Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797

website: www.wallindustries.com • e-mail: sales@wallindustries.com

Page 1 of 8

FEATURES

Selectable by User

2006+A11 Approvals

DESCRIPTION

Size:

9.80 x 5.00 x 1.61 inches

(249.0 x 127.0 x 41.0 mm)

The PSAE800 series of AC/DC switching power supplies provides up to 804 Watts of output

power in a 9.80” x 5.00” x 1.61” enclosed case. This series consists of single output models

ranging from 12~60VDC with an input voltage range of 90~264VAC. Standard features

include high efficiency up to 93%, active PFC, programmable output voltage and output

current, remote on/off, remote sense, power OK signal, and internal ball bearing fan. This

series also has over voltage, over load, and over temperature protection. All models are

RoHS compliant and have UL 60950-1, 2nd edition and TUV EN60950-1: 2006+A11 safety

approvals.

MODEL SELECTION TABLE

Model Number

Input Voltage

Output Voltage

Output Current

Output Power

Efficiency

PSAE-800-12

12 VDC

66.7A

800W

120mVp-p

89%

PSAE-800-15

15 VDC

53.4A

801W

150mVp-p

90%

PSAE-800-24

24 VDC

33.5A

804W

240mVp-p

92%

PSAE-800-30

30 VDC

26.7A

801W

300mVp-p

92%

PSAE-800-36

36 VDC

22.3A

802.8W

360mVp-p

92%

PSAE-800-48

48 VDC

16.7A

801.6W

480mVp-p

92%

PSAE-800-60

90~264 VAC

60 VDC

13.4A

804W

600mVp-p

93%

NOTES

1. Ripple & noise is measured at 20MHz limited bandwidth and using a 12" twisted pair-wire terminated with a 0.1µF & 47µF

capacitors in parallel.

2. For voltages near the low end of the input voltage range, see the derating curve for the power supply output rating.

3. When in parallel operation only one unit might operate if the total output load is less than 5% of the rated load condition.

4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-

confirmed that it still meets EMC directives.