HI-SINCERITY

MICROELECTRONICS CORP.

Spec. No. : Preliminary Data

Issued Date : 1998.08.01

Revised Date : 2000.10.01

Page No. : 1/3

HSMC Product Specification

H7805AI

H7805BI

3-TERMINAL POSITIVE VOLTAGE REGULATOR

Description

The H7805_I series of three-terminal positive regulators are

available in the TO-251 package and with several fixed output

voltages, making it useful in a wide range of applications. These regulators can provide local

on-card regulation, eliminating the distribution problems associated with single point regulation.

Each type employs internal current limiting, thermal shut-down and safe operating area

protection, making it essent-ially indestructible. If adequate heat sinking is provided, they can

deliver over 1A output current. Although designed primarily as fixed voltage regulators, these

devices can be used with external components to obtain adjustable voltages and currents.

H7805_I is characterized for operation from 0

°C to +125°C, and if operating temperature will al-

ways hi, please refer the power dissipation curve.

°C)

• Input Voltage......................................................................... 35 V (5V Through 9V), 40 V (24V)

• Total Power Dissipation ........................................................................................... Internal limit

• Operating Temperature Range ............................................................................ 0 °C to +70 °C

• Maximum Junction Temperature...................................................................................... 125 °C

• Storage Temperature Range .......................................................................... -55 °C to +150 °C

• Lead Temperature (Soldering 10S).................................................................................. 230 °C

Typical Application

Schematic Diagram

6.3V

3.4K

200

10K

200

1K

2K

0.3

26

4K

20pF

4K

1K

12.1K

1.2

26

1.9K

30K

VREF

Input

Output

GND

H7805_I

Vout

Vin

3

1

2

C1

C2

Note :

C1 and C2 are required if regulator

is located far from power supply

filter and load, or oscillation may

induced on the loop.