131

All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.

Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without

notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate

and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which

may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see web site http://www.intersil.com

HCS125MS

Die Characteristics

DIE DIMENSIONS:

92 x 91(mils)

2.34 x 2.31 (mm)

METALLIZATION:

Type: AlSi

Thickness: 11k

Å

GLASSIVATION:

Thickness: 13k

Å

WORST CASE CURRENT DENSITY:

BOND PAD SIZE:

4 x 4 (mils)

100 x 100

(µm)

Metallization Mask Layout

HCS125MS

(12) A4

Y1 (3)

(11) Y4

(10) OE3

OE2 (4)

A2 (5)

Spec Number

518831