DATA SHEET

The information in this document is subject to change without notice. Before using this document, please

confirm that this is the latest version.

Not all products and/or types are available in every country. Please check with an NEC Electronics

sales representative for availability and additional information.

PHOTOCOUPLER

PS9303L,PS9303L2

1 Mbps TOTEM POLE OUTPUT TYPE

HIGH CMR, IPM DRIVER

6-PIN SDIP PHOTOCOUPLER

−NEPOC Series−

Document No. PN10694EJ04V0DS (4th edition)

Date Published September 2009 NS

Printed in Japan

2007, 2009

1. Anode

2. NC

3. Cathode

4. GND

PIN CONNECTION

(Top View)

64

13

2

5

The mark <R> shows major revised points.

The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.

DESCRIPTION

The PS9303L and PS9303L2 are optical coupled high-speed, totem pole output (active high output type) isolators

containing a GaAlAs LED on the input side and a photodiode and a signal processing circuit on the output side on one

chip.

The PS9303L and PS9303L2 are specified high CMR and pulse width distortion with operating temperature. It is

suitable for IPM drive.

The PS9303L is lead bending type (Gull-wing) for surface mounting.

The PS9303L2 is lead bending type for long creepage distance (Gull-wing) for surface mount.

FEATURES

±15 kV/

• Half size of 8-pin DIP

• Pulse width distortion (

• High-speed (1 Mbps)

• High isolation voltage (BV = 5 000 Vr.m.s.)

• Totem pole output (Active High Output Type)

• Ordering number of tape product: PS9303L-E3, PS9303L2-E3: 2 000 pcs/reel

• Pb-Free product

• Safety standards

• UL approved: No. E72422

• CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)

• DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40024069 (Option)

APPLICATIONS

• IPM Driver

• General purpose inverter

TRUTH TABLE

LED

Output

ON

H

OFF

L

<R>

<R>