3

Pin Descriptions

PIN NO.

PIN NAME

DESCRIPTION

1-10

D9 (MSB) Through

D0 (LSB)

Digital Data Bit 9, (Most Significant Bit) through Digital Data Bit 0, (Least Significant Bit).

15

SLEEP

Control Pin for Power-Down mode. Sleep Mode is active high; Connect to ground for Normal Mode. Sleep pin

has internal 20µA active pulldown current.

16

REFLO

17

REFIO

Reference voltage input if internal reference is disabled. Reference voltage output if internal reference is

enabled. Use 0.1µF cap to ground when internal reference is enabled.

18

FSADJ

Full Scale Current Adjust. Use a resistor to ground to adjust full scale output current. Full Scale Output Current

19, 25

NC

No Connect. These should be grounded, but can be left disconnected.

21

IOUTB

The complementary current output of the device. Full scale output current is achieved when all input bits are

set to binary 0.

22

IOUTA

Current output of the device. Full scale output current is achieved when all input bits are set to binary 1.

23

COMP

Connect 0.1µF capacitor to ACOM.

24

Analog Supply (+3.0V to +3.6V).

20

ACOM

Connect to Analog Ground.

26, 11-14

DCOM

Connect to Digital Ground.

27

Digital Supply (+3.0V to +3.6V).

28

CLK

Clock Input.

ISL5761