December 2011

Doc ID 022451 Rev 2

1/17

UM1488

User manual

STPMC1 evaluation software

Introduction

STPMC1 evaluation software is a graphical user interface to read, configure and calibrate an

STPMC1 energy metering device, suitable for parallel and serial hardware interfaces.

The application has a unique work area where the user can read device registers and write

configuration and calibration parameters.

It is possible to configure application parameters (such as sensor sensitivity, crystal

oscillator frequency) to calculate measured energy, current and voltage.

Data acquisition can be customized to read either a single or a certain number of data

samples from the device. Read data can be output in table format and saved to an Excel file.

Two wizard tools are provided to guide the user during the application design and

automatically calibrate the device.

At any time it is possible to save current session data in a project, to open an existing project

or to create a new project.

Figure 1.

STPMC1 evaluation software screenshot

www.st.com