Model. No.

Rev.

Caution:

The LEDs must not be repositioned after soldering.

Do not apply any stress to the lead particularly when heat.

3. Static Electricity

Static Electricity and surge voltage damage the LEDs. So it is recommended that an ESD wrist

band, ESD shoe strap or an anti-electrostatic glove be used when handling the LEDs.

All devices, equipment and machinery must be properly grounded.

4. Others

Reverse voltage should not exceed the absolute maximum rating on the data sheet.

The LED leads may become tarnished if they contact hydrogen sulphide or other gaseous chemicals.

The colour of the LEDs is changed slightly an operating current and thermal.

This device should not be used in any type of fluid such as water, oil, organic solvent and etc.

When washing is required, IPA (Isopropyl Alcohol) should be used.

The influence of ultrasonic cleaning on the leds depends on factors such as ultrasonic power and the way.

Gallium arsenide is used in some of the products listed in this publication. These products are dangerous

if they are burned or smashed in the process of disposal, It is also dangerous to drink the liquid or inhale the gas

generated by such products when chemically disposed.

High-brightness LED light may injure human eyes. Avoid looking directly into lighted LED.

The appearance and specifications of the product may be modified for improvement without notice.

FYLF-1870UR1C

A

Http://www.foryard.com

Model No.

：

：

：

：

FYLF-1860UR1C