DATA SHEET

MOS INTEGRATED CIRCUIT

4-BIT SINGLE-CHIP MICROCONTROLLER WITH LCD CONTROLLER/DRIVER

AND A/D CONVERTER FOR INFRARED REMOTE CONTROL TRANSMITTER

DESCRIPTION

µPD17P207 is a variation of µPD17207 and is equipped with a one-time PROM instead of an internal mask

ROM.

µPD17P207 is suitable for evaluating program when developing a µPD17201A and 17207 systems because

program can be written by the user.

When reading this document, also refer to the

µPD17201A, 17207 documents.

ORDERING

INFORMATION

Part Number

Package

µPD17P207GF-001-3B9

80-pin plastic QFP (14

× 20 mm)

µPD17P207GF-002-3B9

80-pin plastic QFP (14

× 20 mm)

µPD17P207GF-003-3B9

80-pin plastic QFP (14

× 20 mm)

The features of each product is shown in the following table:

When using

µPD17P207-001, be sure to connect the resonator to the main clock oscllator circuit and

subclock oscillator circuit.

FEATURES

• 17K architecture:

General-purpose register format

• Pin-compatible with

µPD17201A, 17207

except PROM programming functiom

• Internal one-time PROM: 4096

× 16 bits

• Supply voltage:

°C)

°C)

°C)

µPD17P207-001

Provided

Item

Pull-up resistor of RESET pin

Main clock oscillator circuit

Subclock oscillator circuit

µPD17P207-002

Not provided

Provided

Not provided

µPD17201A, 17207

On request

(mask option)

µPD17P207-003

Not provided

Provided

µPD17P207 is different from µPD17201A, 17207 in some of the electrical characteristics, such as

supply voltage, the operating ambient temperature, and supply current. Therefore, use

µPD17P207

only for the system evaluation.

The information in this document is subject to change without notice.

The mark

shows major revised points.

Document No. U11777EJ3V0DS00 (3rd edition)

Previous No. IC-2707A

Date Published November 1996 P

Printed in Japan

©

1993