MSK0041RH_15 datasheet(6/6 Pages) MSK

Part #	MSK0041RH

Description	Total Dose Hardened to 100 Krads(Si) (Method 1019.7 Condition A)

Download	6 Pages

Scroll/Zoom	100%

Manufacturer	MSK [M.S. Kennedy Corporation]

Direct Link	http://www.mskennedy.com

Logo

6 / 6 page

6

ORDERING INFORMATION

MECHANICAL SPECIFICATIONS

NOTE: ALL DIMENSIONS ARE ±0.010 INCHES UNLESS OTHERWISE LABELED

Part

Number

MSK 0041HRH

MSK 0041RH

MSK0041KRH

Screening Level

Industrial

MIL-PRF-38534 CLASS H

MIL-PRF-38534 CLASS K

WEIGHT=3.2 GRAMS TYPICAL

M.S. Kennedy Corp.

4707 Dey Road, Liverpool, New York 13088

Phone (315) 701-6751

Fax (315) 701-6752

www.mskennedy.com

The information contained herein is believed to be accurate at the time of printing. MSK reserves the right to make

changes to its products or specifications without notice, however and assumes no liability for the use of its products.

Please visit our website for the most recent revision of this datasheet.

8548-65 Rev. E 12/13

Similar Part No. - MSK0041RH_15

Manufacturer	Part #	Datasheet	Description
Anaren Microwave	MSK0041RH	515Kb / 7P	RAD HARD MEDIUM POWER OP-AMP

Manufacturer	Part #	Datasheet	Description
M.S. Kennedy Corporatio...	MSK4231RH	752Kb / 8P	Total Dose Hardened to 100 Krads(Si) (Method 1019.7 Condition A)
	MSK198RHL	952Kb / 7P	Total Dose Tested to 100 Krads(Si) (Method 1019.7 Condition A)
	MSK0002RH	305Kb / 5P	Radiation Hardened to 100 Krads(Si) (Method 1019.7 Condition A)
	MSK4204RH	368Kb / 6P	Total Dose Hardened To TBD Krad(Si) (Method 1019.8 Condition A)
	MSK496RH	589Kb / 7P	Low Dose Rate Hardened to 50 Krad(Si) (Method 1019.7 Condition D)
	MSK196RH	581Kb / 7P	Low Dose Rate Hardened to 50 Krad(Si) (Method 1019.7 Condition D)
Intersil Corporation	IS-1825ASRH	69Kb / 3P	Single Event and Total Dose Hardened, High-Speed, Dual Output PWMs
International Rectifier	RDHA710FR10A1NK	336Kb / 22P	Neutron and Total Ionizing Dose Test
	RIC7113	2Mb / 64P	Total Ionizing Dose Test Report
	GSIONIRUH33P253B1M	402Kb / 24P	Total Ionizing Dose Test Report