Electronic Components Datasheet Search |
|
VS-ST380C06C0 Datasheet(PDF) 2 Page - Vishay Siliconix |
|
VS-ST380C06C0 Datasheet(HTML) 2 Page - Vishay Siliconix |
2 / 9 page www.vishay.com For technical questions, contact: ind-modules@vishay.com Document Number: 94410 2 Revision: 11-Aug-08 ST380CPbF Series Vishay High Power Products Phase Control Thyristors (Hockey PUK Version), 960 A ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum average on-state current at heatsink temperature IT(AV) 180° conduction, half sine wave double side (single side) cooled 960 (440) A 55 (75) °C Maximum RMS on-state current IT(RMS) DC at 25 °C heatsink temperature double side cooled 1900 A Maximum peak, one-cycle non-repetitive surge current ITSM t = 10 ms No voltage reapplied Sinusoidal half wave, initial TJ = TJ maximum 15 000 t = 8.3 ms 15 700 t = 10 ms 100 % VRRM reapplied 12 600 t = 8.3 ms 13 200 Maximum I2t for fusing I2t t = 10 ms No voltage reapplied 1130 kA2s t = 8.3 ms 1030 t = 10 ms 100 % VRRM reapplied 800 t = 8.3 ms 725 Maximum I2 √t for fusing I2 √t t = 0.1 to 10 ms, no voltage reapplied 11 300 kA2 √s Low level value of threshold voltage VT(TO)1 (16.7 % x π x I T(AV) < I < π x IT(AV)), TJ = TJ maximum 0.85 V High level value of threshold voltage VT(TO)2 (I > π x I T(AV)), TJ = TJ maximum 0.88 Low level value of on-state slope resistance rt1 (16.7 % x π x I T(AV) < I < π x IT(AV)), TJ = TJ maximum 0.25 m Ω High level value of on-state slope resistance rt2 (I > π x I T(AV)), TJ = TJ maximum 0.24 Maximum on-state voltage VTM Ipk = 3000 A, TJ = TJ maximum, tp = 10 ms sine pulse 1.60 V Maximum holding current IH TJ = 25 °C, anode supply 12 V resistive load 600 mA Typical latching current IL 1000 SWITCHING PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum non-repetitive rate of rise of turned-on current dI/dt Gate drive 20 V, 20 Ω, t r ≤ 1 µs TJ = TJ maximum, anode voltage ≤ 80 % VDRM 1000 A/µs Typical delay time td Gate current 1 A, dIg/dt = 1 A/µs Vd = 0.67 % VDRM, TJ = 25 °C 1.0 µs Typical turn-off time tq ITM = 550 A, TJ = TJ maximum, dI/dt = 40 A/µs, VR = 50 V, dV/dt = 20 V/µs, gate 0 V 100 Ω, tp = 500 µs 100 BLOCKING PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum critical rate of rise of off-state voltage dV/dt TJ = TJ maximum linear to 80 % rated VDRM 500 V/µs Maximum peak reverse and off-state leakage current IRRM, IDRM TJ = TJ maximum, rated VDRM/VRRM applied 50 mA |
Similar Part No. - VS-ST380C06C0 |
|
Similar Description - VS-ST380C06C0 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |