-

A ZETTLER

Company

ZETTLER electronics GmbH

Junkersstr. 3, D-82178 Puchheim, Germany

phone:

+49 89 800 97-0

fax:

+49 89 800 97-200

office@ZETTLERelectronics.com

www.ZETTLERelectronics.com

This product specification to be used only together with the application notes

which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf

GROUP

GROUP

2015-01-16

AZ9405

Arrangement

SPST (1 Form A)

SPDT (1 Form C)

Ratings

Resistive load:

Max. switched power: 150 W or 1400 VA (N.O.)

90 W or 850 VA (N.C.)

Max. switched current: 10 A

Max. switched voltage: 30 VDC* or 277 VAC

*

Note: If switching voltage is greater than 30 VDC,

special precautions must be taken.

Please contact the factory.

Rated Load

UL

TÜV

1 Form A

10 A at 125 VAC, resistive, 85°C, 100k cycles

5 A at 277 VAC, resistive, 85°C, 100k cycles

1/10 HP at 125/250 VAC, 85°C, 100k cycles

1 Form C - normally open contacts

5 A at 277 VAC, resistive, 85°C, 100k cycles

5 A at 30 VDC, resistive, 85°C, 100k cycles

1/10 HP at 125/250 VAC, 85°C, 100k cycles

1 Form C - normally closed contacts

3 A at 277 VAC, resistive, 85°C, 100k cycles

3 A at 30 VDC, resistive, 85°C, 100k cycles

1 Form A

10 A at 125 VAC, resistive, 85°C, 100k cycles

5 A at 277 VAC, resistive, 85°C, 100k cycles

1 Form C - normally open contacts

5 A at 277 VAC, resistive, 85°C, 100k cycles

5 A at 30 VDC, resistive, 85°C, 100k cycles

1 Form C - normally closed contacts

3 A at 277 VAC, resistive, 85°C, 100k cycles

3 A at 30 VDC, resistive, 85°C, 100k cycles

Material

Silver tin oxide

Resistance

< 100 milliohms initially

(6 V, 1 A voltage drop method)

10 AMP MINIATURE

POWER RELAY

FEATURES

• 4 kV dielectric strength

• Epoxy sealed version available

• 4 mm clearance & 6 mm creepage (1 Form A)

• 3 mm clearance & 5 mm creepage (1 Form C)

• UL, CUR file E44211

• TÜV R50304647

GENERAL DATA

Life Expectancy

Mechanical

Electrical

Minimum operations

Operate Time (max.)

10 ms at nominal cail voltage (standard)

15 ms at nominal coil voltage (sensitive)

Release Time (max.)

5 ms at nominal coil voltage

(with no coil suppression)

Dielectric Strength

(at sea level for 1 min.)

4000 Vrms coil to contact

1000 Vrms between open contacts

Insulation

Resistance

1000 megohms min. at 20°C, 500 VDC,

50% RH

Dropout

Greater than 10% of nominal coil voltage

Ambient Temperature

Operating

At nominal coil voltage

-40°C (-40°F) to 85°C (185°F)

Vibration

1.5 mm DA at 10–55 Hz

Shock

10 g operating, 100 g damage

Enclosure

P.B.T. polyester

Terminals

Tinned copper alloy, P.C.

Max. Solder Temp.

270°C (518°F)

Max. Solder Time

5 seconds

Max. Solvent Temp.

80°C (176°F)

Max. Immersion Time

30 seconds

Weight

7 grams

CONTACTS

Power

At Pickup Voltage

(typical)

Max. Continuous

Dissipation

Temperature Rise

(at nominal voltage)

196 mW (standard coil)

113 mW (sensitive coil)

676 mW at 20°C (68°F) ambient

42°C (76°F) standard coil

24°C (44°F) sensitive coil

Temperature

Max. 130°C (266°F)

COIL

1. All values at 20°C (68°F)

2. Relay may pull in with less than “Must Operate” value.

3. Specifications subject to change without notice.

NOTES