RF Micro Devices Inc.

7628 Thorndike Road, Greensboro, NC 27409-9421

DS131025

For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.

The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of

third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended

application circuitry and specifications at any time without prior notice.

2 of 7

RFRX1702

Absolute Maximum Ratings

Parameter

Rating

Unit

LNA Drain Voltage

6

V

LOA Drain Voltage

6

V

RF Input Power

10

dBm

LO Input Power

15

dBm

-40 to +85

°C

-65 to +150

°C

ESD Human Body Model

Class 1A

Caution! ESD sensitive device.

RFMD Green: RoHS compliant per EU

Directive 2011/65/EU, halogen free per

IEC 61249-2-21, <1000ppm each of

antimony trioxide in polymeric materials

and red phosphorus as a flame retardant,

and <2% antimony solder.

Exceeding any one or a combination of the Absolute

Maximum Rating conditions may cause permanent

damage to the device. Extended application of Absolute

Maximum Rating conditions to the device may reduce

device reliability. Specified typical performance or

functional operation of the device under Absolute

Maximum Rating conditions is not implied.

Nominal Operating Parameters

Parameter

Specification

Unit

Condition

Min

Typ

Max

General Performance

RF Frequency

17.7

19.7

GHz

LO Frequency

6.85

11.85

GHz

IF Frequency

DC

4.0

GHz

LO Input Drive

+5

dBm

Conversion Gain

13

dB

NF (17.7GHz to 19.7GHz)

2

dB

IIP3

6

dBm

Image Rejection

15

dB

LO-RF Isolation

40

dB

LO-IF Isolation

15

dB

LO Return Loss

12

dB

RF Return Loss

12

dB

2.8 to 4.5

V

350

mA

NOTES: Measurements performed on part soldered on evaluation board with SMA connectors and IF ports connected to an external 90° Hybrid Combiner

and LO Power of +5dBm and at 25°C, unless otherwise stated.

IF = 2.5GHz, RF Power = -20dBm, IIP3 is measured with a 2-tone input of -23dBm power for each tone and

Δf = 10MHz, Vd1 = 2.8V, Vd2 = 4V, Vd3

through Vd5 = 4.5V, MixerBias = 0V