2.5

CMOS Analog Switches

2

_______________________________________________________________________________________

ABSOLUTE MAXIMUM RATINGS

ELECTRICAL CHARACTERISTICS—Dual Supplies

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional

operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to

absolute maximum rating conditions for extended periods may affect device reliability.

V+ to GND ..............................................................-0.3V to +44V

V- to GND ...............................................................+0.3V to -44V

V+ to V-...................................................................-0.3V to +44V

All Other Pins to GND (Note 1) .............(V- - 0.3V) to (V+ + 0.3V)

Continuous Current (COM_, NO_, NC_).........................±100mA

Peak Current (COM_, NO_, NC_)

(pulsed at 1ms, 10% duty cycle)................................ ±300mA

Narrow SO (derate 8.70mW/°C above +70°C) .............696mW

Plastic DIP (derate 10.53mW/°C above +70°C) ...........842mW

Operating Temperature Ranges

MAX460_C_E ......................................................0°C to +70°C

MAX460_E_E ...................................................-40°C to +85 °C

Storage Temperature Range .............................-65°C to +160°C

Lead Temperature (soldering, 10sec) .............................+300°C

-2.5

2.5

-2.5

2.5

-10

10

V

V-

V+

Input Voltage Range

(Note 3)

IN_ = 0.8V, all others = 2.4V

IN_ = 2.4V, all others = 0.8V

CONDITIONS

1.7

0.8

Logic Input Low Voltage

Ω

0.05

0.4

COM_ to NO_, COM_ to NC_

On-Resistance Match Between

Channels (Note 4)

Ω

1.6

2.5

COM_ to NO_, COM_ to NC_

On-Resistance

V

2.4

1.7

Logic Input High Voltage

-0.500

0.001

0.500

Input Current with Input Voltage

Low

µA

-0.500

0.001

0.500

Input Current with Input Voltage

High

Ω

0.1

0.4

COM_ to NO_, COM_ to NC_

On-Resistance Flatness (Note 5)

nA

-0.5

0.01

0.5

Off-Leakage Current

(NO_ or NC_) (Note 6)

nA

-0.5

0.01

0.5

COM Off-Leakage Current

(Note 6)

nA

-1

0.02

1

COM On-Leakage Current

(Note 6)

UNITS

MIN

TYP

MAX

SYMBOL

PARAMETER

or floating

3

0.5

0.5

µA

V

Note 1: Signals on NC_, NO_, COM_, or IN_, exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to max-

imum current rating.

ANALOG SWITCH

LOGIC INPUT