Electronic Components Datasheet Search |
|
PLED150W-035-C4200-XX Datasheet(PDF) 1 Page - List of Unclassifed Manufacturers |
|
PLED150W-035-C4200-XX Datasheet(HTML) 1 Page - List of Unclassifed Manufacturers |
1 / 4 page Specifications subject to change without notice. Note: LED drivers are designed and intended to operate LED loads only. Non-LED loading may be outside the specified design limits of our LED drivers, and therefore cannot be covered by any warranty. If you desire to use our LED drivers to operate non-LED loads please contact us to discuss compatibility. Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com Constant Current Versions - Product Specifications Model Number Output Current (mA ±5%) Output Voltage Range (Vdc) Max Output Power (W) Typical Efficiency PLED150W-428-C0350-XX 350 142-428 150 92% PLED150W-333-C0450-XX 450 111-333 150 92% PLED150W-283-C0530-XX 530 95-283 150 91% PLED150W-214-C0700-XX 700 72-214 150 91% PLED150W-142-C1050-XX 1050 48-142 150 91% PLED150W-107-C1400-XX 1400 36-107 150 91% PLED150W-085-C1750-XX 1750 29-85 150 90% PLED150W-071-C2100-XX 2100 24-71 150 90% PLED150W-061-C2450-XX 2450 21-61 150 90% PLED150W-053-C2800-XX 2800 18-53 150 90% PLED150W-048-C3150-XX 3150 16-48 150 89% PLED150W-042-C3500-XX 3500 14-42 150 89% PLED150W-035-C4200-XX 4200 12-35 150 89% PLED150W-030-C4900-XX 4900 10-30 150 88% PLED150W-024-C6250-XX 6250 8-24 150 88% Constant Voltage Versions - Product Specifications Model Number Output Voltage (Vdc ±5%) Output Current Range (mA) Max Output Power (W) Typical Efficiency PLED150W-024 • 24 1563-6250 150 88% PLED150W-030 30 1225-4900 150 88% PLED150W-035 35 1050-4200 150 89% PLED150W-042 42 875-3500 150 89% PLED150W-048 48 788-3150 150 89% PLED150W-053 53 700-2800 150 90% PLED150W-061 61 613-2450 150 90% PLED150W-071 71 525-2100 150 90% PLED150W-085 85 438-1750 150 90% PLED150W-107 107 350-1400 150 91% PLED150W-142 142 263-1050 150 91% PLED150W-214 214 175-700 150 91% PLED150W-283 283 133-530 150 91% PLED150W-333 333 113-450 150 92% PLED150W-428 428 88-350 150 92% -XX indicates dimming options are available. See options at left. Blank = fixed current output Electrical Specifications Input Voltage Range: 100-277 Vac Nom. (90-305 V Min/Max) Input Over-Voltage: Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max) Power Factor: >0.90 @ > 70% load, 120-277V Inrush Current: <60.0 Amps max @ 277Vac, cold start, full load Input Current: 0.75 Amps max @ 230Vac, 1.41 A max @ 120Vac Maximum Power: 150W Current Accuracy: ± 3% Load Regulation: ± 4% THD: <_ 20% @ > 70% load, 120-277V Ripple & Noise: (Vpk-pk) 5% Vo max @ 20 MHz BW, Full load output in parallel with 0.1 μF ceramic & 10 μF Electrolytic Ripple: (Ipk-pk) 5% Io max @ 20 MHz BW, Full load output in parallel with 0.1 μF ceramic & 10 μFElectrolytic. 120 Hz component (Flicker Free) Start-up Time: 150mS typical @ Full Load, 120Vac/60Hz (1000mS max) Leakage Current: 0.68 mA max @ 120Vac, 0.75 mA max @ 277Vac Hold Up Time: 30mS typical @ Full Load, 277Vac Protection: Over-Voltage, Over-Current, and Short Circuit (auto-recovery) Environmental Specifications Minimum Starting Temp: -30ºC Maximum Case Temp. 90°C Storage Temperature: -40ºC to +85ºC Humidity: 5% to 95% Cooling: Convection Vibration Frequency: 5-55 Hz/2g, 30 minutes MTBF: 260,000 Hours at full load and 40ºC ambient conditions per MIL-217F Notice 2 EMC: FCC 47CFR Part 15 Class B compliant Impact Resistance: 1g/s Weight: 24.4 oz (690 grams) PLED150W Series– Fixed Output & Dimmable Flicker-Free LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Aluminum Housing • Total Power: 150 Watts • Input Voltage: 100-277 Vac Nom. • UL Dry & Damp Location Rated • IP66 & NEMA6 • UL Type HL Rated for Hazardous Locations • UL Sign Components Manual (S.A.M. Models) Rev 9-11-15 Ordering Options: -D: 0-10V & Resistance dimmable models dim 100-10%. Two extra wires on the output side (+Purple/-Gray). Compatible with most quality 0-10V wall dimmers. See page 3. -D3: 3-wire dimmable models dim 100-10%. Three extra wires on the output side (Yellow/Purple/Gray). Compatible with potentiometer dimming. See page 3. -PD: PWM Dimmable models. Two extra wires on the output side(+Purple/-Gray). Dims via positive 10% to 100% Duty Cycle, 200Hz to 1KHz, 0-10V Pulse. See page 4. E332160 Sign Components Manual • IndicatesS.A.M. |
Similar Part No. - PLED150W-035-C4200-XX |
|
Similar Description - PLED150W-035-C4200-XX |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |