CCB200 Series

•

200 W Convection Cooled at +70 °C

•

Industry Standard

“3 x 5” Package

•

Very Low Heat Loss

•

Very High Efficiency up to 95%

•

Very Long Capacitor Lifetime

•

1U Form Factor

•

<0.5 W Standby Power

•

80 V - 300 VAC Input Operation

•

IT & Medical (BF) Safety Approvals

•

Remote On/Off & Power Fail Signal as Standard

•

5 V Standby (Optional)

•

Covers Available

The CCB200 range of single output AC-DC 200 W power supplies feature industry leading efficiency of up to 95% and absolute minimum efficiency of

93% with 90 VAC input and full load.

This leap in efficiency particularly at low input voltages has been achieved by harmonising digital circuitry with resonant zero current switching

techniques.

These techniques coupled with close attention to even the smallest levels of power loss within the unit, have resulted in a convection cooled power

supply packaged in a 3” (76.2mm) x 5” (127mm) x 1.43” (36mm) open frame design unequalled in the market today.

System designers can easily integrate the CCB200 into a wide variety of end use applications due to the very low levels of heat dissipated from the

supply. This low dissipation results in lower component temperatures and extended lifetime by as much as four times when compared to other

convection cooled products with similar power density.

The 200W of power is available without derating over the full input (90V – 264V AC) and temperature range (-20°C to +70°C).

The five standard models cover the voltage range from 12V - 56V, have dual input fusing and are compliant with IEC60601-1 Medical (BF) and

IEC60950-1 IT safety approvals.

POWER

GREEN