Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or

reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its

documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made

or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result

of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use

in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in

personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to

use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices

International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered

Company Number: SC136640

Copyright © 2015 Future Technology Devices International Limited

VM810C EVE2 CREDIT CARD MODULE

Version 1.1

Document No.: FT_001225 Clearance No.: FTDI#464

FTDI Chip

VM810C Datasheet

Embedded Video Engine

Credit Card Board

General Purpose Multi Media Controller

1 Introduction

The VM810C is a development module for

FTDI’s FT810, which is used to develop and

demonstrate the functionality of the FT810

Embedded Video Engine, EVE. This module

behaves as an SPI slave, and requires a SPI

Master for proper micro-controller interfacing

and system integration.

VM810C modules support 5.0” LCD panel

size options. Users can also connect to

different LCD screens as long as they meet

the FT810 technical specification and fit the

VM810C LCD connector.



VM810C50A-D,

3.3/5V

micro-

controller adaptor card with 5.0” LCD



VM810C50A-N,

3.3/5V

micro-

controller adaptor card, with 4.3/5.0”

LCD connector but no display

1.1 Features

The

VM810C

utilises

the

FTDI

FT810

Embedded Video Engine. Graphic, audio and

touch features of the FT810 can be accessed

with the VM810C. For a full list of the FT810’s

features please see the FT810 datasheet.

The VM810C has the following features:



Ready to use LCD module



Options with or without 5” LCDs supporting

resistive touch with pressure sensing



On board LCD backlight LED Driver



Supports mono audio output



On board audio power amplifier and micro

speaker



Flexible

power

supply.

Powering

the

VM810C using SPI host connector, or via

USB Micro-B

port, or via a 2.0mm JST

connector



5 V tolerant buffers when used with a 5V

SPI Master.