4.5

2.5

5.0

4.0

1.5

2.0

1.0

0.5

3.5

3.0

Time

0.0

Max Delay Time = 1.202

Min Delay Time = 0.422

11

SN54HC14, SN74HC14

www.ti.com

SCLS085I – DECEMBER 1982 – REVISED FEBRUARY 2016

Product Folder Links: SN54HC14 SN74HC14

Submit Documentation Feedback

Copyright © 1982–2016, Texas Instruments Incorporated

Typical Application (continued)

10.2.3 Application Curve

Figure 6. Ideal Capacitor Voltage and Output Voltage With Positive Switching Threshold Range

Representation.

11 Power Supply Recommendations

The power supply can be any voltage between the minimum and maximum supply voltage rating located in the

disturbance. For devices with a single supply, TI recommends a 0.1-µF capacitor. If there are multiple VCC

terminals, then TI recommends a 0.01-µF or 0.022-µF capacitor for each power terminal. Multiple bypass

capacitors can be paralleled to reject different frequencies of noise. Frequencies of 0.1

μF and 1 μF are

commonly used in parallel. The bypass capacitor should be installed as close as possible to the power terminal

for best results.