1

Radiation Hardened Dual, Inverting Power MOSFET

Drivers

HS-4423RH, HS-4423EH,

HS-4423BRH, HS-4423BEH

The Radiation Hardened HS-4423RH, HS-4423EH,

HS-4423BRH, HS-4423BEH are inverting, dual, monolithic

high-speed MOSFET drivers designed to convert TTL level

signals into high current outputs at voltages up to 18V.

The inputs of these devices are TTL compatible and can be

directly driven by our HS-1825ARH PWM device or by our

ACS/ACTS and HCS/HCTS type logic devices. The fast rise

times and high current outputs allow very quick control of high

gate capacitance power MOSFETs in high frequency

applications.

The high current outputs minimize power losses in MOSFETs by

rapidly charging and discharging the gate capacitance. The

output stage incorporates a low voltage lock-out circuit that

puts the outputs into a three-state mode when the supply

voltage drops below 10V for the HS-4423RH, HS-4423EH and

7.5V for the HS-4423BRH and HS-4423BEH.

Constructed with the Intersil dielectrically isolated Rad Hard

Silicon Gate (RSG) BiCMOS process, these devices are immune

to Single Event Latch-up and have been specifically designed

to provide highly reliable performance in harsh radiation

environments

Features

• Electrically screened to DLA SMD # 5962-99511

• QML qualified per MIL-PRF-38535 requirements

• EH version acceptance tested to 50krad(Si) (LDR)

•Radiation environment

- High dose rate (50-300rad(Si)/s). . . . . . . . . . . 300krad(Si)

- Latch-up immune

- Low dose rate immune

• Low voltage lock-out feature

- HS-4423RH, HS-4423EH, . . . . . . . . . . . . . . . . . . . . . <10.0V

- HS-4423BRH, HS-4423BEH . . . . . . . . . . . . . . . . . . . . . <7.5V

• Wide supply voltage range . . . . . . . . . . . . . . . . . . . 12V to 18V

• Prop delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250ns (max)

•Low power consumption

- 40mW with inputs high

- 20mW with inputs low

• Low equivalent input capacitance . . . . . . . . . . . . . 3.2pF (typ)

• ESD protected. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4000V

Applications

• Switching power supplies

•DC/DC converters

•Motor controllers

Pin Configuration

HS-4423RH, HS-4423EH, HS-4423BRH, HS-4423BEH

(FLATPACK CDFP4-F16)

TOP VIEW

NC

IN A

NC

GND A

GND B

NC

IN B

NC

2

3

4

5

6

7

8

116

15

14

13

12

11

10

9

NC

OUT A

OUT A

OUT B

OUT B

NC

NOTE: Pins 4 and 5, 10 and 11, 12 and 13, 14 and 15 are double-bonded to their

same electrical points on the die.

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.

1-888-INTERSIL or 1-888-468-3774

Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.

All other trademarks mentioned are the property of their respective owners.

February 11, 2014

FN4564.5